14 replies
by spector1
In a recent role working in engineering at one of the world?s larger financial firms, I was asked by the head of systems engineering to find a way to create a lightweight system for monitoring system performance and gathering trend analysis of overall system utilization.
The firm had a large collection of mostly home-grown scripts for data collection but they were limited in terms of the kind and depth of metrics they could collect, they only could be run once per day, their output was not very informative in terms of graphs and charts, and they only ran on a limited number of older Unix systems. There had to be something better.
The goals were two-fold: first, to help out developers in terms of seeing how well their systems we performing in general on a day-to-day basis, and especially after code upgrades. Second, to allow business unit managers to understand if their investment in hardware was being under- or over-utilized, and to help them determine when they were getting close to needing to invest in additional hardware.
The Job
My task was to find a tool that could provide a much more dynamic experience that could meet a number of goals simultaneously:
- Provide more dynamic, richer graphics
- Able to show short, medium and long-term trends (from hours to 1 year)
- Provide many diverse performance metrics
- Ability to group/cluster hosts
- Light-weight / non-service-impacting to hosts being monitored
- Network friendly
- Near-real-time (seconds between updates, not hours)
- Distributed data for fault tolerance
- Results viewable in a browser without plug-ins
- Cross platform (Unix/Linux/Windows/MacOSX)
- Extensible without re-compilation or specialized tools.
Of course, the other implicit sub-goal was cost-containment. Every dollar spent on software/services or even hardware is a dollar off the bottom line ? so a major concern was both the licensing cost of any potential tool as well as the cost to deploy it.
The Tool
After looking at a large number of commercial packages I was found quite a few tools that met at least 5 of the primary goals, but they were always missing some large element (usually the cross platform piece) that crossed them off the list. Then there was the cost: many commercial products can cost $30-$100 per CPU without a site license, and unless you?re a larger enterprise, site licenses are often out of the question.
After exhausting the commercial possibilities I looked to an Open Source system I?d used when designing large Beowulf-style supercomputer clusters: Ganglia.
Ganglia is a lightweight system performance monitoring package based on a data logging and graphing tool called ?RRDTool? that runs on almost every version of Unix, Linux, Windows and even MacOSX. Ganglia is distributed as a client agent that runs on each host to be monitored. These client agents talk to a web back-end that can run on either Apache or IIS and uses PHP to present over a dozen metrics of system performance ranging from CPU and memory utilization to inbound/outbound packet rates over all of the network interfaces on a machine.
One of Ganglia?s most common uses is monitoring the performance of large-scale super-computer clusters. And, on Gaglia?s homepage there are links to live demos showing Ganglia in action on clusters that contain hundred and even thousands of individual nodes. So clearly this package will scale from the small office networks to the large enterprise.
Putting Ganglia to the Test
Ganglia is available from SourceForge, the large collaborative development site that hosts many thousands of Open Source projects, the site has sources and binaries for Unix/Linux and Windows, and the source code can be compiled very quickly for most other platforms.
The Unix/Linux client uses native packaging tools, and on Windows it uses a standard MSI-style installer. The entire process takes only minutes and the only editing is to a configuration file to tell the agent where to send data. The Ganglia web back-end can be set up to show a long list of individual machines, or you can aggregate machines into groups or clusters and get a top-line graphics summary about the performance those machines as a group. Clicking on a group will let you drill down to find out more about the performance of a given host, down to graphs detailing individual system metrics.
Ganglia also has the ability to be customized thought the use of scripting languages such as Python or Perl to measure any kind of activity that can put represented by a time-series graph. So, if you wanted to not only track the CPU and network utilization of your corporate mail gateway, but display how many mail messages per hour/day/week/month/year it was processing Ganglia can handle that too. You could even graph the temperature sensors inside your servers.
The images from the Ganglia demo sites in the gallery associated with this article gives a good feel for the depth and breadth of what Ganglia has to offer and how well this system can scale.
The Right Tool for the Right Job?
I have used Ganglia to monitor large collections of machines being used as a compute clusters in past jobs, and at the large financial firm we designed our implementation to be able to monitor thousands of UNIX, Linux and Windows servers that were used by thousands of traders and others 24x7.
The capabilities were determined to be a big win for everyone involved: the engineering team got a better tool to help troubleshoot infrastructure problems, Developers got a new view into the performance of their code, and business unit managers got a better understanding of what their investment in hardware was getting them in terms of ROI.
The cost of the software was free; the system itself met a timely need, and could be expanded to meet new needs/challenges without great expense in terms of time or tools. The only cost was rolling out the software which could be easily handled by the existing software distribution system.
All in all, definitely the right tool for the right job, and at a great price point.
Write your own review
If you've found the perfect tool for the job, we want to hear about it. Send us an e-mail describing the product and the job you're using it for. If we feature the product in The Right Tool for the Job? blog, you'll earn a little cash and be featured across the TechRepublic Web site and in our newsletters.
by lovs2look
Please Ganglia developers, package it up for windows into a single download.
by spector1
As
part of my consulting practice I am often asked to help businesses figure
out ways to solve interesting remote access problems: everything from telecommuting
and remote office applications, through firewalls for co-location facilities
or between businesses where there is some data sharing application that needs
a secure, dedicated point-to-point network.
As one can imagine, the costs of deployment and management of firewalls and
VPNs are always high on the list of concerns for businesses. An easy answer
is
to go with some very well known high-end VPN hardware or Firewall vendor,
but more often than not, most of the well know solutions are both not the
best choice, and well out of range from a IT budget perspective. Then there?s
the speed of deployment and delivery, the lead times involved software license
negotiations and hardware purchase lead times can take the wind of the sails
of time-sensitive initiative pretty quickly. Fortunately, like anything in
the IT business, there?s more than one way to get something done.
The Job
The problems I am asked to solve in this space usually fall into three
general classes:
- The need to deploy a secure firewall to a small- to medium-office to
the Internet or to connect satellite offices to a central office or facility. - The
need to deploy a fast, secure, inexpensive VPN system to support telecommuters
on broadband connections. - The need to deploy a firewall than can deliver Quality of Service for
specific
Internet applications.
Whole industries have been built on the creation of massive hardware and
software systems to perform these functions, and if you?re running a massive enterprise,
like a Fortune500 company with dozens of T-3 lines, and 5,000 person offices
in each of 100 countries, these solutions are just the ticket. Is there another
way?
The Tool
Lets make some assumptions about what kind of features and capabilities one
might look for in a well designed, yet budget conscious firewall or VPN system:
- Based on a robust operating oystem with a track record of use in secure
systems - Advanced, stateful packet filters and rule sets
- Support for Traffic Shaping
- Support for 802.1Q VLANs
- Support for both inbound and outbound NAT/PAT (Network
Address Translation / Port Address Translation) - Support open standards (like
RADIUS, IPSec and PPTP) - Support for 16 user VPN ? Support for IPSec/IKE
- Support for wireless (802.11)
Networks - Support for Quality of Service (QoS) for any application/packet type
- Support
for logging and auditing - Support for VPN encryption acceleration hardware
- Real-time traffic graphing
- Easy to use, web-driven management console
This is a short list, but these are very important features. Would you believe
its possible to deliver such a system for under $300..?
Well, in fact, you can.
This is possible with an embedded Unix system called ?M0n0wall? (yes,
those are ?zeros? instead of ?ohs?).
Why Unix?
Unix has long been the choice for IT Security professionals for
the development secure systems like firewalls and VPN servers
for three very simple reasons:
- The source code is generally available so code can
be examined and any vulnerability that comes up can be quickly
and easily
addressed. - Unix systems are extremely modular and can be stripped down
to create a secure profile easily and effectively. - Unix can be run on an incredible range of hardware,
from supercomputers all the way down to embedded systems (like
the one we?ll
discuss in a moment).
The developer of M0n0wall, Manuel Kasper developed this
system using these features of Unix so that he could make
a secure
system based
on readily available
software
components that could be hosted on very inexpensive (yet
high performance) commodity systems.
Putting M0n0Wall to the Test
Now, having just said that M0n0wall was an embedded firewall
and VPN platform, let me backtrack just a little and say
that using and
embedded
system is
the way most people use the package, but its not the only way.
What hardware?
M0n0wall is designed to run on several forms of x86 boxes.
You can run it one a regular old PC if you want to. All you need is a x386 or higher system and two (or more) network cards.
A more common way to set it up is on an embedded system known as a ?Soekris box,? which is a x86 based system available from Soekris Engineering.
Soekris makes several different kinds of embedded systems
but they?re
all about the size of a medium hard-cover book.
For most uses the soekris net4801 is
a good choice; it has 3 network ports, and can be equipped
with a encryption accelerator to speed up VPN access. (if
you wanted
to
create a firewall
for a wireless network, the Soekris
net4521 has
two PCCard slots that you can put wireless cards in ? and
the M0n0wal software will know what to do).
Once the software is installed (which on a regular PC can
be done with a CD-ROM; on the Soekris embedded system you
would
install
the software
on a 16MB compact
flash card) the operation of the software is exactly the
same.
How does it work?
The M0n0wall system first and foremost is a firewall.
It will apply rules at a host, port or packet level. The
rules
can be
as simple as ?Block
all traffic from non-routable networks? to as complicated
as setting up multiple rules for http (web) traffic from
an arbitrary
number
of sources out on the Internet to
an arbitrary number hosts on your internal (protected) network.
It will also allow you to provide quality of service rules
to traffic as well
as created dedicated
pipes and queues to apportion traffic for specific applications,
such as VoIP.
On top of the rules engine a VPN system is available that you can
use to both allow external users to connect to the M0n0wall
(which
as
the
case
of remove users accessing a satellite office) or even use
the M0n0wall to
allow the remote
office itself to be part of a larger VPN using an IPSec
(Secure IP) tunnel. The VPN can speak to most commercial firewalls
and uses standard
authentication
methods
so integration into larger networks is seamless. I have
a number of clients who use m0n0wall as an alternative to expensive
Windows terminal
servers.
It will
happily speak to client that can
The management of the whole system is done through a regular
web browser. (See the gallery for a large number of pictures
of the
M0n0wall in
action). The connection
can be with vanilla HTTP, or though a secure SSL connection
if more security is required.
Finally, the M0n0wall allows for both real-time traffic
graphic so an administrator can see exactly what?s going on, and
the system can log events, errors, security alerts to another
system
over
the network
to
help with auditing and security
management.
The Right Tool for the Right Job?
In a time when information security is in the news almost every day, but budgets
are not exactly overflowing with excess, IT and Security
administrators need to take advantage of good opportunities
whenever they
can find them. M0n0wall
is an amazing little package that gives even large scale
commercial firewall/security packages a run for their
money. If you have a small- to ?medium sized business or are
a larger organization looking for a very cost effective
way
to connect
telecommuters to
regional/satellite offices, then M0n0wall is definitely the Right
Tool for the Right Job.
Write your own review
If you've found the perfect tool for the job, we want to hear about it. Send us an e-mail describing the product and the job you're using it for. If we feature
the product in The Right Tool for the Job? blog, you'll earn a little cash and be featured across the TechRepublic Web site and in our newsletters.
by bsr19
I think I am in need of a VPN for only one directory on a PC (which
could be replaced if nessecary) with changing files that need to be
immediatly (with-in an hour) accessed from four or five remote
computers. I am currently using "foldershare", but am interested in a
better solution if there is one. It sounds as though you are a person
who would know if there is a better solution. I do not need the remote
computers to be able to execute any programs, only send two different
file types both ways. ds dshipp@technologist.com
by lastchip
Just goes to show what's out there if you look hard enough.
No-one can say it's not cost effective!
by dawgit
Good Blog, good stuff. I will say that the M0n0Wall program is very well documented, it shows that a lot of work went to the program. That only means one thing; Good work in = Good program out. I do have one question however, it's made to run on Open BSD, but mentions a totaly different boot configuration. I'm just a little confused on that point (PHP boot? in XML?) But it sounds like it could be the answer to many firms networking tasks, better than just another Gateway appliance.
by britgroup
A free VPN utility is available at http://www.hamachi.cc/ Try it out, worked well for me for quick file sharing and it is password protected.
by spector1
Remember the good old days when you could keep all your data on a
'mess of 5.25" floppy disks?
Too long ago?
Okay, How about all your data on a single hard drive?
No?
Well, how about on several drives spread across a few machines in
your office? You see where this is going... Things have gotten quite
complicated in the Information Age, and like it or not, we're all
using more and more storage and it's getting harder and harder to
manage.
The good news is that disks are getting cheaper, the bad news is that
unlike the "good old days" businesses and even individuals can no
longer afford to have their information storage spread out all over
the place and not to have a coherent plan to manage it all.
The Job
Short of investing in a commercial NAS or SAN system, is there a way
to create an in-house common data storage system that's
- reliable
- secure
- standards based
- easily managed
- expandable
without breaking the bank? Of course. Just give FreeNAS a try.
The Tool
FreeNAS is, in essence, an embedded system for Network Attached
Storage. It's so small it can fit on a USB "thumb drive" or a
CompactFlash card, yet powerful enough to support as many disks as you
can put into a system. It's got very low overhead, and can be managed
from any web browser.
Does this Look Familiar?
If you're looking at the gallery and saying to yourself
"Hmmm.... this software looks suspiciously like the M0n0wall
firewall system he talked about in the last article..." ...well,
you'd be correct. Even though FreeNAS is a totally different project,
done by a different set of developers, FreeNAS uses the M0n0wall code
(stripped down FreeBSD, mini-HTTPD, Perl, PHP, etc.) as its starting
point.
This is one of the interesting aspects of many successful Open Source
projects: developers stand on the shoulders of those who came before
them. In this case, the stripped down FreeBSD code and web services
layer that makes M0n0wall work so well, would seem to make a great
base for a slimmed down, and high-performance storage management
system.
Lead developer Olivier Cochard and his team have developed a very
useful system that can really make a difference if your office (or
your home) data collection is getting out of hand.
FreeNAS supports the all of the standards you'd need, even in a
multi-OS (Windows, Mac, Unix/Linux) environment:
- CIFS/SMB (Samba -- also known as "Windows File Sharing")
- The Network File System (NFS)
- The Apple Filing Protocol (AFP)
- FTP
- RSYNC protocols
- Local and Microsoft domain user authentication
- Software RAID (0,1,5)
- Support for ATA/SATA, SCSI, FireWire and USB Drives.
- WEB configuration interface.
FreeNAS takes less than 16MB of space and can be installed on Compact Flash, hard drive or USB key.
Let's see how well it works...
Putting FreeNAS to the Test
FreeNAS is an embedded system for storage management. It can run on
any x86 compatible system from an embedded system all the way up to
the latest motherboard with SATA, FireWire and USB2 interfacese.
The system I used was a 2.4GHz Pentium IV with 1GB of memory, and 5
120GB SATA Disks. I decided to use all of the disks for storage since
the FreeNAS itself can fit on a USB Flash thumb drive.
The software can be run from hard disk, or from a USB thumb drive. I
decided it might be interesting to see how easily I could get a thumb
drive system up and running.
Installing the system on either device is simply a matter of
downloading the FreeNAS ISO image, buring it to a CD-ROM. Put the
CD-ROM into the system you want to use as your storage server, and
boot up. The CD-ROM installer then gives you the option of installing
FreeNAS onto the hard disk or a USB drive. Once you have done that
(and in the case of USB thumb drives, ensure that the BIOS will allow
you to boot from USB), just reboot the system with the tumb drive in a
USB socket and without the CD-ROM distribution disk.
Once the system was booting from USB device, it was simply a matter of
simple configuration. Just like the M0n0wall distribution its based
on, FreeNAS starts out with a text-based setup where you tell the
system what network interfaces to use (if there's more than one),
assign its network address.
Once the basics are out of the way, fire up a web browser on another
machine, enter the address of your server and log into the admin
console. Once the console is up, you can add disks (which will show
you available disks installed on the system), partition them and so on
until you have created the configuration you want.
I won't take up unnecessary space by detailing the step-by-step
partitioning and file systems allocation, but suffice it to say (and
as you'll see in the gallery) its really a snap to do. The draft user
manual is pretty well done and gives good step-by-step instructions on
creating a NAS system, from the initialization of the disks, to
carving them up into whatever sized paritions you need to suit your
business needs.
Once you have the disks patitioned and shares allocated, add user ids
so your users can connect to the file shares, and you're all set.
What's most intersting is how fast the whole system is. Like
M0n0wall, this is a rstripped down BSD Unix system -- all unecessary
services are not even available on the system. The entire power of
the system is dedicated to serving up filesystems, and the I/O
throughput is pretty much limited to the speed of the I/O card (in
this case a SATA controller, the latency of the disks and the speed of
the network.
The Right Tool for the Right Job
FreeNAS is a very exciting and useful project. It addresses a need
that most businesses (and even individuals) have, that is the need for
a simple yet complete storage managent system that won't wreak havoc
with budgets.
Short comings:
FreeNAS is still a work in progress -- a very functional work in
progress -- but nonetheless, it's still growing project. There are a
few areas, that need to be addressed:
- LDAP or Active Directory Authentication: For many users isn't an
issue, but this is a feature that needs to be developed so that
FreeNAS can support larger enterprises that make use of these
technologies to store user credentials. However, these are solved
problems in both Linux and other BSD implementations, so it's only a
matter of time before this capability arrives in FreeNAS. - Hotswap: At the moment, FreeNAS doesn't support hot-swappable
disks. This is a minor annoyance, meaning that you have to explicitly
un-mount a disk (such as a USB or firewire drive) before removing it
from the system. This will probably only affect you if you use these
devices to do your regular backups. - Backups: How, besides the built-in RSYNC capability, you back up
the system. Of course, there's nothing stopping you from connecting a
tape drive to the system, or even removable storage (the hotswap issue
not withstanding) for long term use a good backup/recovery plan is a
must.
If you need to take control of your small-business or home storage,
FreeNAS might be a great startig point that solves your immedia
problem, and will certainly get better and more capable as this
project progresses.
Write your own review
If you've found the perfect tool for the job, we want to hear about
it. Send us an
e-mail describing the product and the job you're using it for. If
we feature the product in The Right Tool for the Job? blog, you'll
earn a little cash and be featured across the TechRepublic Web site
and in our newsletters.
by spector1
Asterisk - Be Your Own Phone Company
Back in the 1960s there was a rallying cry that defined a lot about
that decade, that cry was "Power To the People!!!"
If
the Internet is nothing else, it has been an exceptionally disruptive
force in terms of taking control away from old, established companies
and institutions and pushing the power, authority and control right
down into the laps of the customers. Don't like your Acme brand computer?
There are hundreds of others. Tired of Windows? Well, how about
MacOSX, or Linux? Don't like the Op-Ed pages in your local paper?
Start a blog.
The last everyday bastion of instutional control -- the telephone
itself -- has finally come clearly into the cross-hairs of the Internet
innovators.
Techies have been experimenting
with placing calls over the Internet since the early 1990s, pioneers
like Jeff
Pulver and discount "minutes" companies like Net2Phone were trail-blazers in
developing technology and using the Internet as a transport mechanism
to connect traditional phones, but it wasn't until Vonage found the right pricing and
distribution formula a couple of years ago that the market for
broadband phones exploded.
VoIP, the Voice over Internet Protocol,
is probably the hottest thing to take hold on the Internet since,
well.. since the Web Browser. First there was Free World Dial-up (started
by Jeff Pulver), then there was Vonage, and then Packet8, and every Cable company ... and now even Verizon
and the rest of the not-so-much-babies-anymore Bell's like SBC/ATT and
Verizon are offering broadband phone services in an attempt to get
into this game before all their customers fly the coop.
Even though VoIP/Broadband phones may seem like the the hot new
thing, an even more profound technology is about to take broadband
phones and telephony to a whole new level bring voice, data and fax
integration to small offices and even home users.
The Tool
Having a broadband phone line is one thing, but there are ways to go
well beyond a simple VoIP phone -- in fact if you are in business (or
even have a home office) there are ways to radically change how your
company works using Asterisk.
What it is...
Asterisk is a software based telephony switch that brings the power of
a telco switching complex into a commodity PC. It does it in such a
way that almost anyone can set one up (and if it's beyond your skills,
there are a lot of qualified consultants around too) and among the
amazingly long list of features it provides are:
- Detailed Calling Records
- Call Forward on Busy
- Call Forward on No Answer
- Call Forward Variable
- Call Monitoring and/or Recording
- Call Parking
- Call Queuing
- Call Retrieval
- Call Routing both in-bound and out-bound (for picking a lowest cost service, for example)
- Call Transfer
- Call Waiting
- Caller ID
- Caller ID Blocking
- Caller ID on Call Waiting
- Calling Cards
- Conference Bridging
- Dial by Name
- Distinctive Ring
- E911
- Fax Transmit and Receive integration (via a 3rd Party OSS Package)
- Interactive Voice Response (IVR)
- Local and Remote Call Agents
- Music On Hold and/or Transfers
- Predictive Dialer
- Open Settlement Protocol (OSP) for integrating with other phone switches
- Overhead Paging
- Remote Call Pickup
- Remote Office Support
- Roaming Extensions
- Route by Caller ID
- SMS Messaging
- Streaming Media Access
- Text-to-Speech (via the Festival text-to-speech system)
- Three-way Calling
- Trunking (the ability to bundle phone lines together)
- VoIP Gateways
- Voicemail
...and this is the short list.
Asterisk has the ability to build a complete switching system out of a
PC (a typical hardware configuration is listed below) that can
integrate traditional phone lines (also knows as "POTS lines" short
for "Plain Old Telephone Service"), VoIP services, Broadband phone,
faxes and much, much more.
Putting Asterisk to the Test
Before we get too far along, let's define a few terms:
VoIP -The Voice of Internet Protocol which allows voice
streams to by sent over the Internet
SIP - The Session Initiation Protocol; a protocol for
starting services (like a VoIP session) between two end-points on a
network. SIP is the starting point for VoIP calls but can used to
start up almost any kind of computer-to-computer communications
Trunks - outside connections to the Telephone Network, either
by a regular (POTS) phone line, a VoIP adaptor or a more
sophisticated connection like a T1 connection that has been
provisioned for voice channels.
Extensions - your phones in your office or home.
FXO - Foreign Exchange Office. From the telephone switches
perspective, a telephone network that is foreign to the local switch
(i.e., the Asterisk system); in this case that's your connection to the
outside phone network.
FXS - Foreign Exchange Stations. Dial-able phones that are managed by Asterisk.
Routing - The mechanism that determines how an incoming call
is routed to whomever is supposed to receive it.. For example, a call
could be sent directly to an extension and if no one answer it could
be sent to voice-mail. Or, if no one answers it could be routed to a
queue where the caller wait until someone is available to answer to
call.
Dial Plan - A set of rules that describe how calls placed
from an extension are handled. For example, a dial plan may say that
"any 4 digit number dialed starting with '6' is an internal call, just
send it to the right extension." The same dialing plan may have a rule
that says "all non 800/888/877 number calls dialed should go through
the cheap broadband connection and not through the expensive POTS
lines."
What You Need
Asterisk can run in surprisingly light (by current standards) hardware. You'll need:
- Minimum of a PIII @ 500 MHZ x86 machine with a hard drive (80GB
will be fine), 1GB of memory, CD-ROM, and a network interface - An Asterisk Developers Kit from Digium which includes a TDM400P
4-port card. The basic kit includes on FXO and one FXS daughter cards
which can handle one FXS (e.g. your desk phone) and one FXO or external
trunk (e.g. your POTS line).. If you want to be able to, for example
use your POTS line for your local calls and a broadband phone for your
long distance, you will want to add one more FXO daughter card to your
order. - A copy of the Asterisk@HOME CD-ROM
ISO image that has been burned to a CD-ROM
Installing the software
I found the easiest way to get started is with the Asterisk@Home
CD-ROM image. This will delete any existing system -- so I used a
machine that I dedicated to this purpose, or a test machine that has
nothing of value on it. Alternatively, you can install Asterisk and
its companion applications by hand, but that is a much, much more
involved process which is covered in great detail on the Asterisk web
site.
Configuring the System
Once the system finishes installing and building (about 30 mins) the
system is ready to be configured. All of the default passwords on the
system and the basic "quick-start" installation instructions can be
found on the Asterisk@Home
Wiki.
The actual system configuration consists of connecting the phone
lines and your extensions into the Asterisk hardware, telling the
system which lines/extensions are which and lastly telling Asterisk
how you want to provision the lines.
Setting up the physical hardware is easy: On the Digium card the
FXS modules are green -- you plug your phones (extensions) into these.
The red modules are the connections to service providers (hence the
term "foreign exchange office"); plug your POTS line or broadband
phone connection into these. Next, Asterisk has to be told about the
extensions and the outside connections.
Configuring the actual lines is done very easily through a
browser-based software package included in the install called FreePBX. FreePBX allows you to
control almost all aspects of the Asterisk configuration. In order to
set up the system all you need to do is identify your extensions (the
FXS connections) and the Trunk links (the FXO connections) and tell
Asterisk how it should route in-bound calls and what "dialing plan" should
be used on any of the external connections.
There are a number of screen-shots in the gallery that show they
main FreePBX interfaces you need to set up in order to get Asterisk
running. With the exception of your extensions and the connections to
the phone network, everything else is set up with reasonable defaults.
Oh, of course you will want to create voice-mailboxes and passwords,
but that too is covered by a web page in FreePBX.
The Right Tool for the Right Job
This is one of those DIY projects that is at once very scary
(building your own phone switch a bit on an little off the wall
concept for most people) and incredibly liberating in that you can
take control of your company's telecom system and really save yourself
potentially hundreds of thousands of dollars per year.
At one level you're taking a relatively low-powered PC, and simply
putting about $300 worth of hardware in it and running some Open Source
software, and at another level you're threatening the profits of your
local telephone monopoly all in one fell swoop.
There is a lot more that comes with the Asterisk@HOME package; this is
only the barest of beginnings. The Asterisk web site has a large volume
of information about how to set up very sophisticated systems that
allow you to mix and match all sorts of different systems from
POTS lines and T1s to SIP based Internet dial-up systems and even how to
connect multiple Asterisk system together to create entire private
phone exchanges over the Internet.
If your company is looking for more ways to control your expenses,
this is clearly the right tool for the right job! Asterisk provides a
level of control over your telecommunications capabilities and costs
that used to cost around $50,000 just for the bare-bones switch. With
the features available in Asterisk, and the networking capabilities
available to even the smallest of businesses, this tool really levels
the playing field for small and medium sized businesses.
Write your own review
If you've found the perfect tool for the job, we want to hear about
it. Send us an
e-mail describing the product and the job you're using it for. If
we feature the product in The Right Tool for the Job? blog, you'll
earn a little cash and be featured across the TechRepublic Web site
and in our newsletters.
by mikatrob
We say ?Free? well Free is ?Free if you can configure it?
and then maintain it afterwards.
Licenses is really all we?re talking about in the free
section, until you really ?pop the hood?
Example we handle Northern Telcom (Nortel) they have systems
under many different names anyways, We very easily can install a northern
system with symposium, predictive dial, voice mail, etc.. If you have the cash
Nortel has the Keycode to unlock their equipment and it?s pretty stable as it
has always been.
Now of course being that we play with Northern equipment and
see the initial cost of a Option 11 with voice mail with 20 phones run about
11k ? then with software upgrades that remove ? Yes, remove options that once
worked and now are licensed (VM for example) Now after changing to the ?new?
and seemingly ?free? upgrade from Northern customers find while they purchased
a switch and a phone and VM (voice mail) they now have to purchase an
additional ?Seat?/?License? to access the voice mail that ?used to work? It
makes me wonder if Northern is looking to do themselves in.
Sorry for the ramble, we began tinkering with Asterisk and
combining these systems with existing Northern switches ? to allow the Asterisk
server to handle ALL VM, and also add conference calling capability ?without
cost of license? we became very interested in how far it could be taken, and to
be honest ? We have always been a strict Northern shop ? Before but after much
time and watching the development of this software and the hardware
capabilities that Digium provides ? we run our own PBX now across Asterisk and
use it with blinding saves (in comparison) down time is scheduled and we do run
a fault tolerance system (voice is critical) Many people and shops have a
misunderstanding upon getting into Asterisk about the cost ? It can be setup on
cheap hardware but then again so can the entire network (without redundancy
etc?) but when the rubber hits the road ? hardware and good common sense cost
real money ? why do we not only pay 500.00 for our file servers? Because we
have learned via failures ? cheap cost to much.
Even though this article does only describe the bare bones
(1 FXO/1FXS) port being about 500.00 it is strange that companies think that
same thing applies to them and then become unset to find ? once they order 20
Cisco 7960 phone and the Single span T card and a Real Server each having SLA?s
and warranty ? that the cost come to about 15k.
The ground shakes and these people miss the boat entirely
about what it is they are doing and the limitless possibilities this system
(and others) provide. The average Northern switch with the ?free and built-in?
modules of Asterisk (conference, VM, hotel ? Wake up call etc..) cost well over
60,000.00 ? Fully ported out (Northern port by port basis) now that small
investment of 15k does not sound so bad after all, then get to the meat of it ?
when adding a phone- simply buy the next Cisco 7960 phone and add it?s mac
address to the Asterisk switch and dial on ? getting VM, Conferencing, on
demand recording, predictive dial etc.. for the cost of the phone only ? 250.00
today?s price.
Now in comparison on our Northern systems with the same
feature set(s) we add a phone ? Hold on we have to make sure the switch has
that many phones allowed to access it (provisioned) if not back to Northern to
get a new Keycode so we can add that new phone and not to mention the cost
involved because of everyone called to accomplish this simplest of simple task.
Education in what is free and what is prudent and wise
(again, Voice is mission critical) so the hardware is not something you?d pull
out of the garage and ?junk together? but it seems today many pie in the sky
managers have this idea ? and while I have little problem with ?if they buy it,
We?ll install it? the understanding (education) of what they built their PBX on
is junk ?so do hold me responsible when the ?junk? breaks and you are down all
day without a backup plan.
This systems really is rocking and I?m not completely down
on Northern either -we have dyed in the
wool Northern people and it does work, but the amount of options they miss out
on is tremendous ? shops need to expand and it?d be wise to have ?in-house?
techs try this out and see as it does work well and it is stable in-fact we do
more work on our Northern customers than our Asterisk customers networks.
Some of the complexities can be rather mind numbing and many IT guys turn away ? fear or what not
or an desire to remain the same ? what ever it may be ? it to bad as it short slightness
on the IT individuals behalf to ?not continue learning? while it removes cash
flow from the bottom line of business.
This is a mixed review upon people, understanding and preconceive
notions, but where there is no confusion over here ? again we are a Northern
shop ? Asterisk is honestly blowing our Northern equipment offerings out of the
water and adding to the bottom line.
Cheers and Enjoy Playing!
by spector1
NMap - A Security Scanner
Back in the old days of nobody much cared (or often even knew!)
what services were running on machines on the Internet. In fact,
supporting a lot of services was almost required given that mainframes
and large minicomputers were expensive and needed to pay for
themselves every second they were running, so runing lots of services
and squeezing every possible use out of a machine was imperitive.
In fact, back in the day when I was a systems programmer
at New York University's Courant Institute, it was common to be able
to see all sorts of services open and available for public use on
far-flung machines all of over the Internet (well, truth be told, it
was called the ARPAnet back then --
the same network protocols, different scale :-) .
In fact, it
was common to actually look around for available services (such as
remote printers) by just poking around someone else's network until you
found what you were looking for. Clearly, we're living in a very
different time.
The Internet as we know it today is a far cry from the almost
folksy-seeming ARPAnet of 20 years ago. Beyond the ubiquitiy of the
Internet itself is the incredible power of even the cheapest computer
and the incredible number of services that come with every O/S -- and
for the purposes of this discussion -- the incredible number of
services that are turned on by default on those computers.
These days, security is the name of the game: everywhere, in every
context and at all possible levels of hardware, operating system and
application. It's estimated that for Windows XP machines that are put
onto the Internet unpatched, it can take less than 20 minutes for the
system to be attacked, compromised, and under control of some
not-very-nice people.. Ensuring your systems and your applications
are not exposed is a requirement for staying in business.
With all these "evil-doers" on the loose, under every
rock, one can't be too careful!
The Tool
Today I'd like to introduce NMAP. NMap is an application
that is designed to probe systems at the network layer to determine
what services they're exposing to the networks to which they're
connected, and if possible to tell the user anything that is known
about vulnerabilities of those services or about the system
itself.
NMap was origally written for Unix type machines but can be
compiled for almost any currently available OS. It has principally a
command line application, but it ships with a GUI front end that will
compile on most platforms (screen shots are available in the
NMap Image gallery).
It may not be obvious is you're not a networking expert, but every
computer that has a TCP/IP protocol stack and even implementation of
the protocols that ride on top of it, such as FTP or SSH, can be
identified by some of the design choices that the programmers made
when they wrote the software. The ability to identify systems and services by
their specific characterisistcs is called "fingerprinting" and like
its namesake in the physical world it allows experts to determine
which system is which in a networked environment.
Fingerprinting a TCP/IP stack for example may look at the way sequence numbers are
generated for TCP packets, or look at specific features that are implemented in a
the IP protocol, and in almost all cases the results of this fingerprinting
can identify what OS is being used on the system without ever having to log in to it.
Higher level protocols occasionally have bugs that can be exploited
remotely through number of techniques, or they may have non-critical
characteristcs that can be used to identify them. Some protocols
even, as part of their very desgn, give out a lot of useful
identifying information when you connect to them that will help
someone looking to break in. Sendmail mail servers for example
usually announce the OS it's running on, the OS version along with its
own when a connection is make to port 25 on a machine running the
server.
NMap's mail goal is to sniff out what services are running on a system,
identify them and tell you if it knows of any potential vulnerabilites
in what it finds.
Putting NMap to the Test
First, a word to the wise:
NMap is a not a tool for "hacking into
networks," it is an analysis tool.
However, in the age we
live in, running an analysis tool that can poke at machines on a
network and get them to reveal their potential vulnerabilities is not
something to ever, ever do on a network that your are not the owner
of. In fact, in most juristictions in the US such probing (or
"doorknob-twisting" as its referred to in security circles) is
tantemount under the law to attempted breaking and entering. In some
countries tools like NMap are actually illegal (there's a geat
discussion to be had on the studpidy of such laws, but that's a topic
for another venue). Suffice it to say, any time NMap is run it must
be done with the explicit consent of the network/system owners.
Okay, now that I've scared you... what can we do with NMap?
NMap has several modes of operation
- TCP/UDP Probe Mode - most useful for finding running services and open ports
- Host Sweep Mode - most useful for finding out what's on a subnet and identifying O/S versions
- SYN/FIN Probe Mode - most useful for finding well-known flaws in IP stacks
The most common use for NMap is the first one -- the TCP/UDP probe
-- using NMap in this mode you can find any and all open ports on a
general. This is useful because it first and formost tells you what
you should be turning off to help secure your system(s). Secondly it
can also so you what ports are actaully enabled (i.e., have a live
network socket) but don't seem to be running a known protocol. This
can be use to find out is someone is running some kind of stealth
services on your network. I once used this to catch a rougue employee
who had set up an illegal file sharing network (doh!!) at a large bank
I consulted for. Got me a nice pat on the back; got the employee a trip
to the unemployment line.
NMap's second most common mode is the ping sweep mode. This is a
really useful too because it can allow you to audit a network very
quickly and find every device on the network. Hosts, serves, routers,
printers, you name it. Most network tools, like network analyzers are
passive -- they wait for devices to talk, then they can identify and
enumerate them. NMap in this mode pings an entire network and then
figures out, using its fingerprinting system -- all the vital stats on
the devices it finds. There are a few examples of this in the
screenshot gallery.
The last major mode allows you to probe devices to determine if
they're vulnerable to fundamental flaws in their IP protocol
implementations having to do with the ability to compromise half-open
network connections. A very esoteric way to break into system that's
beyond the scope of this article.
Whether you're using NMap from the command line or through it's
GUI, there are a large number of fine tunable options that allow you
to modify the operations of the scans. You can throw data at a port
to see how a service responds, you can try to overload a service to
see if the underlying server can hadle various loads, you can even
narrow down the ports you're testing to just a select port of
interest, or have NMap continuously test all possible ports.
The Right Tool for the Right Job
NMap is a very powerful tool for exploring networks and helping to
secure systems and the services the deliver. It can quickly identify
not only every machine and devices on the network, but what O/S it's
running, what services it is making available, and even what ports are
running but are not what they appear to be (for example, if someone
were runing a file-sharing system over the port usually reserved for
another service).
NMap it quite useful by itself, but like many tools it has a whole
ecosystem surrounding it that can enahce it's utility. In the resouces
section at the end of this article are a number of add-ons and
supporting tools that make NMap an even more potent security analysis
tool.
MNap is clearly the right tool for ensuring that only the services
you want on your network are actually there, however, as indicated
above, it's also a tool whose use can be miscostrued because of the
infomation it can collect, so it needs to be used only in ways that 1)
are with the permission of the system owner(s) and 2) in ways that
will not inflict any kind of damage or denial of service to the system
and networks it's aimed at.
Resources
- NMap Audit is a set of Perl scripts that will automate scans and generat niceley formatted reports detailing the results
- Remote NMap is a client/server program that allows scans to be run from a centralized server
- PHP NMap is a Web-based front end for the NMap scanner
- Qpenmapfe is a version of NMap that can be run on Linux based hand-helds like the HP (Compaq) Ipaq or the Sharp Zaurus; this could be useful for running NMap against hosts on wireless networks to see what services are being presented "over the air" via their wireless interfaces.
Write your own review
If you've found the perfect tool for the job, we want to hear about
it. Send us an
e-mail describing the product and the job you're using it for. If
we feature the product in The Right Tool for the Job? blog, you'll
earn a little cash and be featured across the TechRepublic Web site
and in our newsletters.
by spector1
Auditing Live CD Image gallery
Security Auditing with Linux Live CDs
Did you ever want to see what was really happening on your networks
and systems but thought to yourself "Ugh... I don't have the time to
find and install lots of auditing tools..."? Well, if you've ever
needed to do a little deep-dive into the state of your network,
systems or applications, there is a way to get access to all the tools
you could possibly need, and not even install a single peace of
software. "Huh?!?!" I hear you say... "How could that actually be
possible?"
Well, there's a really interesting class of Linux (and BSD and
occasionally Windows) distributions out there that are collectively
known as "Live
CDs." Live CDs are OS distributions on a CD- or DVD-ROM that can
be booted up on a desktop or laptop system in such a way that you can
run a live copy of the OS and all the tools on the CD-ROM out of RAM
instead of off the hard disk.
Live CDs are used for all sorts of things these days, principally as
demos -- kind of a try-before-you-buy approach to software
distribution. There are Live CDs for Linux desktop distributions
like Ubuntu, for Arcade Games, Parallel Computing and Clusters and
Grids, Scientific/Mathematical Computing, Bio-informatics... and of course,
system security testing and auditing (there's a resource list at the end of
this article that highlights some of the better known Auditing
Live CDs).
The Tool
In this installment of The Right Tool for the Right Job, we'll take
a look at a Linux Live CD for System Auditing. There are many, many
Live CDs for security; it seems that everyone has a different idea on
what tools people might need, or how a security tool set should look.
We're going to look at is Backtrack, which is one
of the better presented systems in terms of both its tool-set and its
overall presentation.
Putting Live Auditing CDs to the Test
First, (some more) words to the wise:
NMap, covered in my last article, was a another very powerful tool
-- Linux Auditing Live CDs are hundreds of times more powerful as they
contains hundred of more tools. NMap was a system for scanning hosts
for known vulnerabilities and open ports that might otherwise go
unnoticed ... most of these Live CD Auditing/Security suites have that
digital equivalent of lock-picks and system cracking tools on them;
they are very useful for helping to secure your network. However, like
NMap, Baktrack has even more powerful tools can get you into a lot of
hot water should they be used in an inappropriate way. (As they say,
You Have Been Warned.)
More Tools Than You Can Shake A Stick At
Backtrack, like most Auditing Live CDs, comes with dozens and dozens of
tools; the creators have tried to break the large selection of tools
that Backtrack makes available into manageable chunks of functionality
(this section uses the names that BackTrack uses, other Live CDs may
use different terminology):
- "Exploit Archives" - This includes links to databases/sites of listings of known exploits, vulnerabilities as well as links to patches
- "Enumeration" - DNS and directory services type tools useful in examining what kinds of services a host or network is presenting on the network and using those services to acquire information.
- "Scanners" - These are tools like NMap that help an auditor discover systems on a network, or probe a given host(or set of hosts) to find open ports or known vulnerabilities
- "Password Crackers" - These are, literally, password cracking systems. These are used not to break in to systems but to see if users have password that are vulnerable to being broken into.
- "Spoofing" - These are tools that allow the auditor's machine to masquerade are a number of different kinds of systems or services to see who well other network services or systems can code with a variety of security situations.
- "Sniffers" - Sniffers comprise a wide variety of tools, from network analyzers like WireShark (formerly know as "Ethereal"), to protocol analyzers that look at high-level protocols like AOL Instant Messenger, IRC, and Jabber or even database transaction sniffers.
- "Wireless Tools" - A collection of 802.11 wireless network scanners and other tools for monitoring, analyzing and testing WiFi networks
- "BlueTooth" - A similar set of tools for examining BlueTooth networks and devices
- "CISCO Tools" - A collection of tools for probing and connecting to CISCO Routers
- "Database Tools" - A collection of tools that will allow you to analyze database connections and traffic for a number of common databases
- "Forensic Tools" - A collection of tools that are very useful in systematically documenting data discovered during an audit; some of these tools save data into databases, others are systems that allow an investigator to make a pristine copy of a hard drive in order to secure a disk image for examination.
The Backtrack system also includes a large number of servers (i.e.,
web servers, etc) that can be run locally and other systems like "honey
pot" tools that can be used to attract attackers on a network for the
purpose of seeing what tools they are using to attack or
survey your systems and networks.
Linux Auditing Live CDs can be used in any number of modes: As
purely probative tools they can be used to find out what's running on
a network (e.g., with a network analyzer) in terms of services and
information flows (who is talking to whom, and what about). Or, they
can be active in terms of auditing the state of security of a specific
system (e.g., trying to break in using password crackers or testing
for known exploits). And, lastly the forensic data capture tools can
allow you to keep all the data you generate and organize it in a way
that can be used to create a chain of evidence that can be use in a
formal audit or other investigation.
Finally, you might be wondering how you would save any of the data
you are capturing when the system you're running basically exists only
in the RAM of a laptop that will revert to whatever it was running
before at the next reboot? The designers of these Live CD seem to
have thought of everything: You can activate the network interface
and give your temporary auditing station an IP address and then access
your network file systems as you normally would, or you could just pop
a USB flash drive into a free USB port and save your data there.
The Right Tool for the Right Job
Obviously in a relatively short article there's no way to do
justice to the scope and breadth of a tool-set like Backtrack (or any
of the other Live CD-based auditing/security systems that are available).
However, it's plain to see that if you need to be able to quickly set
up an auditing suite to be able to satisfy your boss (or yourself) that
all's right with you network you can't go wrong with a tool like
Backtrack.
Auditing/Security Live CDs
As stated, Auditing/Security Live CDs come in many, many flavors.
Some are full blown distribution in their own right (i.e., you often
have the option to install them onto the system disk, not just run
them as Live CDs), others are small enough to be run completely from a
USB flash drive.
- Backtrack
- Auditor
- PHLAK ("Professional Hacker's Linux Assault Kit")
- INSERT ("Inside Security Rescue Kit")
- Local Area Security
- PLAC ("Portable Linux Auditing CD")
Write your own review
If you've found the perfect tool for the job, we want to hear about
it. Send us an
e-mail describing the product and the job you're using it for. If
we feature the product in The Right Tool for the Job? blog, you'll
earn a little cash and be featured across the TechRepublic Web site
and in our newsletters.
by reality
I've just found a link to this article in todays TechRepublic email.
I'm proud to say I'm a member of the remote-exploit team, so am very pleased to see BackTrack being mentioned here!
Also, to see the Auditor Security Collection next in your list of other live cd's.
BackTrack is the product of the Auditor and Whoppix (Whax) live cd's joining together. This is the first public release version of BackTrack, so please keep an eye on it as it will grow in functionality and hardware compatability over the next releases! Auditor always had a reputation for being one of the most frequently maintained, up-to-date lived cd's available. A reputation which will, hopefully, be continued with BackTrack.
I hope many TechRepublic members can make great use of this diverse distro.
by spector1
?Sim-Business? meets the Real World: Salesforce.com
When you?re starting a business there are any number of really important and, honestly, really expensive chores you have to do, and one of the most important is making a decision about how to actually keep track of your customers, your suppliers, sales leads, and so on. If you have a sales team you have to give them tools in order for them to be able to take all of this info and close deals. Oh, and then there?s email. Hmmm? what about promotional tools like mass mailings, advertising, and all of the other bits that help further your business?
Back in the ?dot com? boom Application Service Providers (ASPs) were suppose to fix all these problems by renting us applications and allowing us to outsource all of the nutty gritty of our businesses to them, and somehow we?d all just rake in profits. As we know it didn?t quite work out that way, mostly because the ASPs of the late 1990s were focusing on all the wrong areas. They thought that it was all the desktop applications and other ephemera that needed outsourcing. Well, they were wrong and the ASP industry paid a heavy price for their miscalculation.
In the middle of all of the euphoria over the possibility of no-install software was a Sales Force that was founded by a former Orcale exec named Marc Benioff. SalesForce from the outset had figured out something that had eluded most of the other wannabe ASPs which is no one needs an outsourced word-processor or a remote desktop run on a server in Bangalore ? what they need is tools to perform the real nuts and bolt of running a sales-driven business. Not only that, they need to be able to interact with it just like it was software they were running on their own systems, but also it had to be deliverable without the installation of even a single byte of software.
They started off slow in the early 2000s, but Sales Force has really taken off and it has gotten a lo of traction, a lot of very high visibility customers including Down Jones Newswires, Staples, AOL, Coldwell Banker, Avis, Commerce Bank, and hundreds of others.
The Tool
Sales Force (or as most people seem to refer to it ?Sales Force dot Com? or ?S-F-D-C?) is at its core a very generic Customer Relationship Management or ?CRM? System. It consists of a series of modules for managing people (employees), customers, contacts, generating reports, scheduling events, modules for automating the sales work-flow process, email, tools for running marketing campaigns, keeping track of documents and contacts, and a lot more. Of course, all of this is accessible via and run though a plain, vanilla web browser.
SalesForce provides all of this at a variety of price points to meet almost the needs of a large variety and kinds of business. There are editions for ?teams? (for 5 or fewer users), a Professional edition, and Enterprise and an ?unlimited edition.? Many of the differences between the editions center around 1) the number of applications available or 2) the amout of storage per user that is included in the monthly charges. SalesForce has a comparison chart but the pricing is typically about $50 per seat per month depending on the edition and any added services/features.
What makes SalesForce special is not the generic components but how many tools they provide on top of the basic system that make it easy to load your existing data into the SalesForce CRM system and then the literally hundreds of tools they provide to help you take advantage of the basic CRM underpinnings.
Putting SalesForce.com to the Test
SalesForce has put together a very well rounded collection of fields that represent all the major aspects of a generic business ? and you can add more if you need to --- and stocks this basic database with a large number of reports, dashboards, and other tools that take a lot of the pain out of finding basic information about the operating characteristics of your business.
SFDC provides all of the background services your expect beyond the tools themselves: they provide all of the backup and recovery services on could need; they will also back up your data on-to-fly, which is very useful if you are about to make some large change to your data and want a clean way to back out in case something goes wrong. SalesForce also will provide you with a ?test bed? copy of your data and applications if you want to keep your live production data separate from anything you are experimenting with. SalesForce also provide a number of tools to help you bring in data (say from an external database) or even aggregate 3rd party content into your SFDC data. There are also a host of 3rd party software vendors that make tools and utilities for manipulating data stored in SalesForce or for providing access to SalesForce from mobile devices such as Blackberrys and other PDAs.
One of the most interesting aspects of SalesForce?s approach to providing a true hands-off ASP experience is their AppExchange service. AppExchange is where 3rd parties (or even other SDFC customers) package up tools and utilities and make them available to SFDC customers. For example, if you needed a compensation system to automatically figure out bonuses for your sales team (something that is not provided out-of-the-box by the SFDC tools) you could find several providers of such a service via the SalesForce AppExchange.
The tools that are available via the AppExchange cross dozens of disciplines and many industries. For the most part, thanks for a clear and well thought our API, all of these tools drop right into and know how to access and manage your data. Of course, if you need something that isn?t even available via the AppExchange, both SalesForce and a whole ecosystem of ISV and VARs stand ready to help you extend the basic SFDC capabilities. Oh, and if your create some new SFDC capability, SalesForce will be happy to help you resell your new tool via the AppExchange as well.
The Right Tool for the Right Job
The tools that are available via SalesForce represent a whole new genre of applications -- the truly mobile office. One company I work with, a very high-end boutique personnel/staffing firm has no ?central office,? rather they are completely distributed around the continental US, their work bound together by the Internet and the tools that SalesForce allows them to bring together to run their business. Their recruiters and sales people are out in the field generating business and solving customer needs. In general, they have no need for data centers or a large IT staff.; Salesforce hosts their data 24x7x365, backs it up; they can modify the system?s operations and tools as often as they need by creating reports, dashboard and other tools to help them optimize their efforts.
For an increasing number of agile businesses, the secret to success is not in having the most IT toys, but in having the best services available and being able to use those service wherever and whenever they can best generate and service business. SalesForce is well worth looking into if your company?s business is something other than the business of IT.
Write your own review
If you've found the perfect tool for the job, we want to hear about
it. Send us an
e-mail describing the product and the job you're using it for. If
we feature the product in The Right Tool for the Job? blog, you'll
earn a little cash and be featured across the TechRepublic Web site
and in our newsletters.
This discussion is closed to new replies.
Trending After Hours posts
Sort by Trending
