Discussion Locked

Load Sharing over two ethernet interfaces

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My internet come on two ethernet interfaces. One is satelite(two way), the other is ADSL. Satelite is primar, adsl is secondary.
1-st choice.I want when primar conection(satelite)will be about 75-80% full, to start to work the secondary conection. And also adsl to be backup.
2-nd choice.Two conection to work at same time and when one is down the other to be backup.
Ruter is CISCO 2821. Can you recomend me that, and maybe you can recomend me another solutions

1 reply

by choppit

I use a Nexland ISB Pro 800 Turbo which allows balancing of two connections in addition to ISDN modem failover. It doesn't actually balance the bandwidth usage but divides the connections by the specified ratio. If the unit is configured with a 75%/25% split then every 4th connection will use the second WAN port. Nexland is now part of Symantec and the closest offering is now the SFVA 200/200R

http://www.symantec.com/smallbiz/gtw/pdf/SGS_300_matrix.pdf

This discussion is closed to new replies.