23 replies
by clover252525
Why not just reinstall Win95, or even better, Win98? Do an FDISK, reformat it and start from scratch. After all, it's the computer you want, not the data on it.
clover
by scubascotty
by rogerndgreen
As well as agreeing totally with the first answer (it should get rid of any detritus anyway) after you had deleted the PWL files & rebooted, did it remain at the login box? You should have been able to put in any name & password to get through.
Ifthis didn't work (and you STILL don't want to reinstall from scratch) remove the network card (you don't say you are going to use this) and then in safe mode, remove all networking components in Control Panel, Networks. Then reboot.
Personally, I would say to hell with it & Fdisk.
HTH
Roger G
by scubascotty
by tech010
by scubascotty
by robin
There is a registry key that you need to change.
When in safe mode, load regedit.exe (If regedit is restricted, please e-mail me)
Go to:
HKEY_LOCAL_MACHINE \ Network \ Logon
You will find a key called 'MustBeValidated'
Change the value from1 to 0
This will fix the problem!!!
Cheers,
Rob
(robin@innocent.com)
by scubascotty
by nettek
by scubascotty
by mphoffar
Sounds like it was setup for a NT logon. Boot it into safe mode. Go into the network applet into the control panel. Go into Client for Microsoft Networks and uncheck the log onto windows NT domain. You may also have to change the userlevel shareaccess.
If also else fails just change the windows login from Client to windows login on the initial screen
Mark
by scubascotty
by earnest
Hi there. I assume the password you are referring to is NOT the c-mos password in the bios of your pc because you were able to get to the windows directory to delete the *.pwl files. The pwl files are the password files stored locally in the pc. Deleting them should remove any existing passwords. It does not stop your being prompted for passwords. This comes from you client setup in network neighborhood. In any case if the password is windows in origin then just cancel throght it. This "Network" password is for access the the network not windows desktop. If the client is microsoft ot netware this is the case. For windows client
you have the option of setting up profiles. But the desktop is still accessable via the "cancel" option the theprompt. To get rid of the network stuff if you aren't using it then delete the network card from device manager or from network neighborhood. Usually if it is a network prompt it will not show up unless it sees a network. Good luck.
Bo
by scubascotty
Nice... Answer #6 is it, as I posted to your *identical* query over at MCSE Live! (http://www.2000tutor.com/cgi-bin/Ultimate.cgi)
I wouldn't mind the points if mine was first.
by scubascotty
by davida
by scubascotty
by rsears
by scubascotty
by zahid72
There are two methods,which i have done past four months ago and i have now some idea of it.First go to my computer>control panel>network>remove microsoft family logon/Client for microsoft networks
but be sure that you dont have any network
and
your isp would work in absence of these components
2.search profile directory and take a backup of this directory or copy it into my documents and restart your computer and if you didnt see password prompt you wont get the problem again
by scubascotty
by scubascotty
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending