Discussion Locked

Logging in IPX or IP

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are running Netware5 and windows98 with Novell's Client 3.21.
I would like to know how to tell if I'm logging in with ipx or ip connection. And also how to switch between them.
For some testing reasons I need need to login with a ipx connection sometimes, and then with an ip connection sometimes.
Thanks Kenny

7 replies

by jpt

After you logged in you can start NWadmin and select a user - Details - Enviroment and under Network address you can see if your are logged with IP or IPX. You have to disable the protocol in Control panel - Network yuor nor want to use.

John

by klovell

I know at work they can log in both ways without disabling the protocol. There is another way. Thanks anyway

by john22

You can right click on the "N" symbol on the lower right hand corner of your desktop and go to 'Netware connections' to see whether you are currently logged in via IP or IPX. To switch between IP and IPX you will need to go to the network properties and enable or disable what ever protocol you wish to use.

by eclaybaugh

If you go into the system control panel, network, click on Novell network client, select properties, select the protocol preferences tab. He you will be able to select in which order you would like which protocol to load first. Move ip to the top of list and the workstation will try and use ip first. If you move ipx up it will login with ipx first then ip if a ipx connection cannot be made. When you change these protocols you will have to restart the pc to login with new protocol.

Hopesthis helps.

This discussion is closed to new replies.