Discussion Locked

Logon problems

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Having reloaded the NT 4.0 server, I find that I cannot logon at any of the NT 4.0 workstations. Before loading I removed the workstations from the server list and reconnected them after I had done the reload.
I have tried removing the clients fromthe domain and reconnected them with no positive outcome. Can anybody explain, how to do a reload without incurring this difficulty?

8 replies

by m.a.s. matrix

OK, WHAT YOU HAVE TO DO FIRST WHEN YOU INSTALL SERVER IS SELECT PRIMARY DOMAIN CONTROLLER, ONCE YOU GET INTO SERVER AND HAVE THE SERVICE PACK INSTALLED....CHECK YOUR DEVICES TO MAKE SURE THAT EVERYTHING IS RUNNING...(NIC CARD). WHEN YOU RELOADED YOURESET THE SID FOR ALL THE WORKSTATIONS. YOU HAVE TO ADD THE WORKSTATIONS TO THE SERVER FIRST AND THEN GOTO EACH WORKSTAITION AND ADD THE MACHINE TO THE DOMAIN. RIGHT ON NET NEIGHBORHOOD,CHANGE,PUT IN THE USER NAME/DOMAIN AND PUT A CHECK IN THE BOX FOR ADD TO DOMAIN. YOU HAVE TO USE ADMIN IN THE USER BOX ALONG WITH YOUR PASSWORD TO ADD THE MACHINE. THIS SHOULD WORK.

by erikdr

Are the NT workstations visible when you run Server Manager on the PDC? This is the acid test whether your 'reconnected workstations' indeed got correct computer accounts with SID's. If not, apply the procedure described in answer 1...

Hope this helps,

/ The Netherlands

by mtwyford

Be sure to check trust relationships on your PDC (domain controller) to be sure they can log in with proper profiles....
add the computers to the PDC first, then go to the workstation and add to the domain. It's a good practice not to use administrator account for adding machine, create an 'adduser' account with domain admin rights. e-me for more info, just went through this one..

This discussion is closed to new replies.