Discussion Locked
0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
A customer I deal cannot access his WINNT system due to the fact that he gets an error message saying NTLDR file missing/not found. What can I tell him to correct the problem
8 replies
by gperrie
do you have a recovery disk? If so just boot into NT setup then choose the recover option and give it the disk when prompted.
I've seen this a few times and mostly was caused by a corrupt SOFTWARE registry hive. Repairing from a recent recoverydisk fixed it.
Gavin
by dkwaczala
Poster rated this answer
Also, I have seen this when a user modifies his disk partitions, either changing size, or creating different ones, and as soon as he reboots, the OS says "no ntldr found", and what I did to correct this issue was to boot up using Win9x boot disk, and then checking fdisk to see what the compter thinks is the "Active" partitions are, I found out that when that user modified his partitions, it also modified his boot.ini file, so using fdisk, I was able to set my main partition to "Active" (which was changed to inactive?) and rebooted and all is fine now.. Hope this info helps. Remember booting under Win9x boot disk will not harm your orginal PC's configuration.
Remember to do the above, bootup using the Win9x Boot disk, and go into fdisk, and choose option #4 "Display partition info", and find out if their original partitions are still set in place.
by dkwaczala
Poster rated this answer
by breers
make sure he doesn't have a floppy disk in the drive when booting
by dkwaczala
Poster rated this answer
by dkwaczala
This question was closed by the author
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
1 helpful
16 replies
0 helpful
13 replies
0 helpful
3 replies
0 helpful
2 replies
Question
Is WSL still relevant in 2026?
0 helpful
1 reply