Discussion Locked

Machine wont boot!!!!

0 helpful
24 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I was installing my sound card driver when in the middle of installation, my machine rebooted itself and now windows wont boot up. I get errors and freezes everywhere, even in safe mode!! Is there a way i can remove what ever is loaded thus far through DOS? How can i fix this???

24 replies

by avachon

Hi, rather than trying to figure out what installed or did not through dos, it would be better to use a boot disk and try to boot up the machine so you can do something like run regclean to get rid of loaded fragments (regclean is available on microsoft's site. If you do not have a boot disk, you can download one at www.bootdisk.com Hope this helps.

by rxander

I must assume that you are running win98, if that is the case, you can boot from a win98 boot disk and ran "scanreg /restore" from the windows directory. This will give you the option of restoring the registry back toa a previous days registry. Win98 will backup the last 5 days registries, assuming you reboot everyday. If you are running win95 scanreg /restore is not an option, you might want to refer to "Q131431 How to Troubleshoot Registry Errors " from the Microsoft knowledge base. This article can be found at http://support.microsoft.com

by dmiles

Try using the system boot disk if you have one available,if system boots from the disk,then you want to run scan disk,boot the system into safe mode and remove the sound card through device manager,now reinstall the card and follow on screen instructions.

by slogmeister

You have to start through safe mode, at least. Go to device manager, click on the device, if it exists, click on properties, click on the driver tab and click on driver file details button. There it will list the files that are being used by this hardware. Write them down and delete them from dos.

If you can't find the device in device manager, examine your driver disk/cd and look at the files that it installs. Extrapolate the filename extension (ie. driver.sy_ is driver.sys and thing.ex_ is thing.exe) and find them (using dir /s) and delete them.

If that doesn't work because they are all buried in some type of resource file (.cab or whatnot) then restore your registry as noted above in someone else's letter, or if you're using Win95, copy system.da0 to system.dat (backup system.dat just in case), and that will restore your registry to its previous settings. Granted, they may be no good because you have already rebooted a couple of times, but it's worth a shot.

Try removing the devices in sa

by morribri

First things first.. Remove the card and see if you can boot your machine up, either to win95 or in safe mode. If you can get into one of those two, go through and remove anything that was installed for that card. If not, then you get to play with all the fun stuff that everyone else has mentioned.

by stngfan1

All the other answers look good for software removal. I would actully remover the sound card from the slot and try to reboot. You might have an IRQ conflict, which prevents you from booting in safe mode.

TM

by vijaychandran

do one by one step in the order
1. remove the sound card
2.boot machine to the safe mode.
3. if there you can see the sound card driver in the device manager remove it. other wise go to %rootwindows%\inf directory and find the inf file of your sound card and delete it
4. shut down and fix the card back and boot the system.
5. while booting check if any irq conflict. you can see in the text mode of initial booting period. if so change the slot of the card and try again .
good luck !

by ejamili

hi, this the best way to solve this problem: bypass the operation using shift+f5 first u must delete the system.dat and user.dat but this file are hidden just use the attribe command this 2 file is located in windows directory just type dir.dat /s to view the file. and then unhide this file and delete it.

by ddansereau

Your computer was working fine prior to the install? My guess is that during the physical install something got jarred loose. Check (reseat all cards, memory, cables, jumpers) connections and see if that doesn't solve the problem.

by dragonesx

Obtain from a friend their Win98 Boot disk. Boot system, go into BIOS, alter boot sequence to A: drive first, shut down. Insert Win98 Boot Disk and turn on comp. This will enable you to boot in DOS with CD support. Disk includes troubleshooting tools. I hope this resolves your prob. It will then enable the loading of Windows.

This discussion is closed to new replies.