9 replies
by hal 9000
I would be looking at the servers for the problem. Depending on what is installed on these it sounds as if you are experiencing Synchronization Problems that is allowing some units to drop off the network.
You'll have to look in the Permission of the server/s and reset these to what is required.
A little more info may have generated a more informed answer but that is the best that I can come up with without knowing more as I do not know what to tell you to change.
Col
by cg it
by cg it
by cg it
by bfilmfan
When you say that the machines are "hubs" did you mean they are intelligent switches?
Or did you mean they are computers acting as routers?
One of the things to check on your network is that ports 135-138 are not locked down. If they are, the RPC secure chanenl will fail and the systems will "drop" off the domain, but will remain visible in AD. When the tombstone period is reached (60 days, unless you have changed it), the object will be removed from Active Directory.
More information is needed to assist you with this issue, but I suspect that it is the RPC secure channel one that has been endlessly discussed in this forum.
by bfilmfan
Based on your commentary, I have a better understanding of the issue you are seeing. Pull the DCDIAG tool off the Windows CD or download it from Microsoft (it's free) and then run the following command line:
dcdiag /v /e /f:dcdiagLOG.txt /ferr:dcdiagERROR.txt
Search to see what errors are being reported by the domain controller. This will give us a better idea of what is happening.
by raging monk
by shaun.hill
Not sure if this applies to you but I've seen this problem before. Firstly though do the machines go back onto the domain after a reboot?
If this is the case check TOE is turned off on the NIC. Some switches don't support it and I've seen server drop off the domain but after a reboot they work for a couple days before having to reboot again.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending