Question Locked

memory leak in spoolsv.exe

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Windows 2003 Std sp2 server that is my primary print server for my entire company. We have 40+ different printers configured on it.

About 2 months ago, we started having performance issues with the box... the Print Spoooler service apparently has a memory leak and eventually consumes so much memory that the service stops responding. Print jobs accumulate in the queues but never get printed. As soon as we restart the spooler service, the jobs spit right out.

I've changed all of my printer ports to Standard TCP/IP ports per a suggestion I found on google, and installed SP2 per M$ suggestion, but nothing has helped. spoolsv.exe will go from 2MB to almost 500MB of memory in less than 12 hours.

I can use perfmon to monitor the memory usage and such, but so far I haven't found any utility that will identifiy EXACTLY what is causing the spooler service to leak memory like this. There are so many different drivers that use spoolsv.exe, how can I tell which one is the culprit?

thanks for any suggestions. this is driving me insane.

14 replies

by Former member

Hi acausermaker,
i have loaded some info for you.
Hope this helps.

WinTasks Process Library
spoolsv - spoolsv.exe - Process Information

Process File: spoolsv or spoolsv.exe
Process Name: Microsoft Printer Spooler Service

Run a Free System Scan for spoolsv.exe Related Errors

Description:
spoolsv.exe is a Microsoft Windows system executable which handles the printing process. This process is not critical to the running of the system but should be terminated unless suspected of causing problems.

Note: spoolsv.exe is a process registered as a backdoor vulnerability which may be installed for malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, Internet banking and personal data. If unaccounted for, this process should be removed immediately.

Determining whether this process is a virus or a legitimate Windows process depends on the directory location it executes or runs from in WinTasks.
For More Information About spoolsv.exe - Get WinTasks 5 Pro Now!

Recommendation for spoolsv.exe:
Should not be disabled, required for essential applications to work properly.
To get control over your running programs we suggest WinTasks 5 Pro

by dan_fiore

I am having a similiar issue. Did you ever find a solution?

by acausemaker

still suffering along with the same issue. I've tried changin all my named printer ports to vanilla tcp/ip ports, updating drivers, everything I can think of. At this point I just have a batch script that restarts the spooler every morning at 7am... and I just keep an eye on it. I hate hate hate not knowing the solution for this. It's driving me absolutely insane!!!!!

by hrai1982

have a windows server 2003 SP2 as a print server and the print spooler hangs very often

I recently updated to SP2 hoping it was a bug that would be addressed in SP2.But the problems still persist.I have drivers(printers) from different companies - mainly HP along with few Ricoh and Sharp printers.
I also have a server edition of PDF factory pro

The event logs usually show up the following message :-

Event ID: 7011 Source: Service control Manager

Timeout(30000 milliseconds) waiting for a transaction response from the spooler service

As a workaround i have to restart the spooler services every few hours through a script ( as mentioned in the original post)

Any ideas ?

by sauravrohilla

u need to clean up your print hive, make sure no printer is using any third party print monitor and print processor.

check the version of spoolsv.exe, localspl.dll, winspl.dll, it has to be updated.
this will resolve the issue.

your PMLC to monitor memory leak

by sauravrohilla

delete all the *.bud , *.spl and *,shd files.exclude spooler folder from virus scan.
use process explorer to find out if there is any third party thread getting loaded in spoolsv.exe

by pmarion

Try changing the printer properties so users print directly to printer.

by hrai1982

I do not have this problem any more.We had an incorrect/incompatible BIOS version on our print server.Never had any problems once we put on the right version ....

by linuxluva

How did you ever determine the incorrect bios version on the print server?

how would I make that call? how do i ell if i have the wrong BIOS version?

thanx a bunch

by dcilhk

could you give me your action plan. thanks.

by linuxluva

this is a huge issue for me. I am not sure why Microsoft has not addressed this.

has anyone figure this out. I have done extensive research. there are a couple of things users have suggested that works for a bit not nothing permanent.

linuxluva@linuxmail.org if a solution plz

by kennethhine

I've a W8k TS server with TCPIP printers on the network andthe Spoolsv Appcrash has recently become a problem. In examining the text of the appcrash message I've found that HPBF201H.dll seems to be involved in the issue. I'll see if I can update the drivers for those specific printers (all different models) and hopefully make it go away!

This discussion is closed to new replies.