Question Locked

Microsoft Vista Blue Screen of Death

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi

I am facing following problem frequently, anyone knows the cause(s) or solution?

Thanks

--------------------------------------------

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 00000000
BCP2: 00000002
BCP3: 00000008
BCP4: 00000000
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\Mini111208-05.dmp
C:\Users\Ali\AppData\Local\Temp\WER-38000-0.sysdata.xml
C:\Users\Ali\AppData\Local\Temp\WERF404.tmp.version.txt

Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

7 replies

by rob miners

C:\Users\Ali\AppData\Local\Temp\WERF404.tmp.version.txt did you have a look.

by rob miners

Click Start, right mouse click Computer and select Properties. Select Advanced System Properties, continue. Select Settings for Startup and Recovery. Untick Automatically Restart.

Minidump Files can be found here. C:\WINDOWS\Minidump\Mini******-**.dmp

How to read the small memory dump files that Windows creates for debugging

http://support.microsoft.com/kb/315263

To download and install the Windows debugging tools, visit the following Microsoft Web site:

http://www.microsoft.com/whdc/devtools/debugging/default.mspx

Instructions on using Windbg.

Open Windbg and select file, Symbol file path and brows to the Symbol folder that you have downloaded and installed Symbols to, select OK.

Close the workpage and save the Workspace information. This should lock in the Symbol path.

Open Windbg and select file and select Open Crash Dump then navigate to the minidump, highlight it and select Open.

There are two ways to use !analyze -v the easiest is to click on !analyze -v under Bugcheck Analysis.

When you have ran the initial dump if you look to the bottom of the screen you will see kd> to the right of that type in !analyze -v and press the Enter key.

Ctrl + a will let you copy the information and paste it into notepad.

Look to the bottom of the page for information like this. This was fixed by updating the Graphics Drivers.

FAULTING_THREAD: 864f6a98

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0xEA

PROCESS_NAME: logon.scr

LAST_CONTROL_TRANSFER: from 00000000 to bfef0fea

STACK_TEXT: f6434e6c 00000000 00000000 00000000 00000000 sgiul50!DrvBitBlt+0x585

STACK_COMMAND: .thread 0xffffffff864f6a98 ; kb

FOLLOWUP_IP: sgiul50!DrvBitBlt+585 bfef0fea 75f9 jne sgiul50!DrvBitBlt+0x580 (bfef0fe5)

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: sgiul50!DrvBitBlt+585

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: sgiul50

IMAGE_NAME: sgiul50.dll

DEBUG_FLR_IMAGE_TIMESTAMP: 3b7dfec7

FAILURE_BUCKET_ID: 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

BUCKET_ID: 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D

by ideaddict

Thanks for reply
I unchecked the Automatically restart option and now waiting to see if that particular error comes again or not?

Till that time am also try to debug this error

by ideaddict

Windows NT Version 6.0 Build: 6001 Service Pack 1
Product (0x1): Windows Vista (TM) Ultimate
Edition: Ultimate
BuildString: 6001.18000.x86fre.longhorn_rtm.080118-1840
Flavor: Multiprocessor Free
Architecture: X86
LCID: 1033

by rob miners

for the minidump to see if it shines a light on the problem. :D

This discussion is closed to new replies.