Discussion Locked

MKE Panasonic CDROM Driver

0 helpful
22 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm trying to find a MKE Panasonic CDROM driver for a Soundblaster 16 card(non plug n' play) model No CT1750. I've found the spec for the CT1750 on Creative's site, but I've had no joy on either Panasonic's or Matsushita's sites regarding a MKE Panasonic cdrom driver. Any help (as you all know) would be greatly appreciated,

Cheers,

Andy

22 replies

by martinqc

Finding drivers for CDROMs and sound; I go to driverguide.com. they have listings of some of the most obscure drivers you could think of. Free registration. I signed up over a year ago and my subscription is still active. very quality site.

by bdgray

I beleive that this CD uses an old proprietary IDE interface. Make sure that you soundblaster has an IDE connection that has Panasonic written on the board. While the connection on newer soundcards is physically the same the hardware on the older ones were designed specifically for certain CD-ROMS and will not work on a standard CD-ROMS. Conversly, the panasonic will not work with normal IDE interfaces, even with the proper drivers.

by sltaylor

The MKE Panasonic CD Rom driver is one of the default drivers for Windows. Perform a manual hardware installation (don't let Windows detect it). Choose show all hardware (devices), and Panasonic should be one of the CD ROMs listed.

by bambam

If the CD-Rom has a model # CR-5XX and your e-mail account will support file attachments, then you can e-mail me at slyk3@juno.com with your e-mail address and I will upload the oringinal installion disk to you.

by hotindia

your question is not cleared. CD Rom driver has nothing to do with sound card and vice versa. so tell me that which driver you are looking for ?

If your CD ROm iss not working than try to install the Samsung Cdrom universal driver it works for all CD Rom.

thanks

Ravi Sharma

This discussion is closed to new replies.