Discussion Locked

modem configuration

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
have a hp pav 3260 w/lucent isa modem. downloaded new driver and installed. now no modem folder in control panel, installs modem as other device. modem in system has no properties and cannot remove. only remove w/driver update uninstall. tried pci modem, would not load software. win95 machine worked fine before driver update. need help......

5 replies

by vue

1. Remove all the modem in modem folder.
2. Remove all the modem driver in system and also in other device.
3. Start/shutdown.
4. Remove the modem from the pc and reboot.
5. Check to make sure that no modem and no driver loaded anywhere. Start/shutdown.
6. Install new and follow screen or .
7. Sometimes, it read the modem installation manual before the installation.

by tdenne01

once i installed the new driver, there is no longer a modem folder. have tried this procedure with no results. thanx

by vue

1. Remove all the modem in modem folder.
2. Remove all the modem driver in system and also in other device.
3. Start/shutdown.
4. Remove the modem from the pc and reboot.
5. Check to make sure that no modem and no driver loaded anywhere. Start/shutdown.
6. Install new modem and follow screen or .
7. if everything else failed read the modem setup instruction or read the book.

This discussion is closed to new replies.