Discussion Locked

modem not dialing

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have installed a internal modem in Win 98. When I try to connect, the modem is not dialing. The error says "Error 630, The modem is not responding properly, Please verify the modem is plug into the computer and to the telephone line."
I have check in Device Manager and the modem is installed with no errors.

Anyone can help?

thanks and regards,

19 replies

by ozi eagle

Hi,

Firstly go to Control Panel - Modems. Select the modem you have and run the diagnostics. This checks whether the computer actually sees the modem.

by hargerd

Have you tried....
1. Remove and reseat Modem
1. Uninstall and Reinstall drivers

LFT

by p.j.hutchison

First plug a phone into telephone socket and make sure you get a dial tone. Make sure telephone cable is plugged into correct socket in back of modem (there may be two, one for a phone and one for connecting to telephone socket), make sure they are secure. Try dialing (enable sound to hear that the modem is trying to connect), if no luck replace telephone cable and try again.

by blackcurrant

Hi

Check the COM port being used by the modem (as shown in Device Manager), the same port that your application is trying to use. Ensure the port is not being used by another device. Also, try uninstalling the modem completely - removing it from the computer, removing the driver, and reinstalling from scratch.

Good luck

by dmiles

go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
If it works, go back to Modems -> General -> Properties -> Advanced and remove any initialization strings. Try connecting again.
If this fails, create a new Dial up connection using the same modem and try to connect with it.
After you have tried all of these steps, if you are still getting error 630 then it is very likely that the modem itself is physically damaged. Contact your modem?s manufacturer for more help regarding the problem.

by willcomp

New or used modem?

If phone jack checks OK and modem test in Control Panel/Modems is good, then port on modem may be kaput. It is not uncommon for line surges to blow resistor in phone line connection rendering jack inoperable. Modem tests OK but there will be no dial tone.

Dalton

by gil6002

Hi!,

Two possible reasons that clearly come to mind. First you need to see if the modem is communicating with the OS by running the Modem Diagnostics under Start>Settings>Control Panel>Modems. If that screen is blank when you run that diagnostics, then I would look towards a Port conflict, if your Device Driver was correctly installed. What you need to see in that screen is your modems initialization strings.

by choy.waigiat

Thanks for all your advice. I had tried all solutions from all of you and the modem just won't work. Anyway I have bought a external USB modem to solve my problem.

Further advice from anyone is welcome.

regards,

by gil6002

Hi,
Not only try reseating the modem but also move it to another expansion slot, try that also then try the process of recoginition

This discussion is closed to new replies.