6 replies
by dmiles
You can use the help menu from the Start menu and in the window type in modem and it will give you options.
To change advanced port settings
Control Panel,double click the System icon,select the device manager tab click on the plus besides modems in the tree select modem and right click and select properties,select the resources tab,uncheck the automatic settings and now select the port you want to set the modem on.follow on screen instructions.
by irishluk
by jokeman
by irishluk
by dle
Com1/3 = IRQ4
Com2/4 = IRQ3
As you can see you can only use either com1 or com3. And if com2 is being used, you can't use com4 for the modem.
I suggest you check to see if anything is used on Com1. If not, disable it from CMOS and you will have access to Com3.
by irishluk
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending