8 replies
by dmiles
Be sure that your lines are connected and then from Start>Settings>Control Panel,click on the System Icon,thenDevice Manager tab go to modem,click the plus and highlight the modem,click the properties button.on connection tab you want to see this order 8,none,1.
2nd Option
In the Control Panel Right click the Modems Icon and click Properties then check the box to see if modem is setup on system,click the add modem,when the pane ask the type of modem,select the mfr.and the modem type install ageneric driver and later install updated driver for your modem.
by condorstats
When I went ot control panel the properties is un selectable.
The order is 8,none,1
by condorstats
by mogge
by condorstats
by gremlintrm
Hi,
Assuming you use MS Windows 9x,NT. Start HyperTerm and open a direct COMx connection to your modem. Give the Hayes command "AT" and you should recieve the response "OK" from
you modem. If not, play around with the remote echo options. If youstill cannot get the "OK" response you should try using another RS232 capable system before confining your modem to the scrap heap.
A modem BIOS update or re-initialisation to factory settings may also help.
CU,
Glenn
by condorstats
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending