Discussion Locked

Monitor Not switching ON after booting

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hi, I am facing strange problem with my samsung 17' inch syncmaster montior all of a sudden. Whenever i switch my computer on the monitor doesnt switch on, it switches on only after pressing the monitor button(on/off) many times. Sometimes it switches on after pressing it 2 times, sometimes it takes 10 times.It happens even if i turn off the monitor & try to turn it On after sometime. I checked by connecting my monitor to different machine, but the same problem occured. What might be the problem?? Please help.

4 replies

by nicknielsen

It's possible there is some corrosion in signal contacts. Disconnect the signal cable from your monitor, re-connect it and see if that helps.

If that doesn't help, your monitor is failing and will need to be replaced soon.

by unhappyuser

Check both ends of the cable (if it can be disconnected from the monitor end) and check for bent, broken or corroded pins. If your lucky it might be the cable - do you have a spare? If that's not it, and the unit is not under warranty, say goodbye and get a new one.

EMD

by ssundip

Checked the cable, i feel one of pin has gone half inside or may b evn cut. IS it because of that??

by nicknielsen

if you can get a replacement monitor cable. If a new monitor cable does not fix the original problem, you will have to replace your monitor.

This discussion is closed to new replies.