Discussion Locked

moving nds

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hello, I had a novell server with netware 4.11 , newly I install netware 5 on another server , I must move old nds (on netware 4.11) to new, uut I donot know, can you help me.

thank you

5 replies

by bengels

Hi! Was the 4.11 the only server in tree before? Why don't you use both the 4.11 and the 5 server for fault tolerance? It is _not_ recommended to have only one server holding the NDS. I would integrate the NW5 server into the tree and change the NDSreplica type to Master on the NW5 server, holding a r/w replica on the second server. If you can't maintain the old one in the tree, install the new one into the tree, change the replica type to master and then remove the old server out of the tree.(Do all NDS replica operations with NDS manager.)

by techdictator

If you must, although I agree with the previous poster. You can install the NetWare 5 server into the tree and remove the NetWare 4.11 server from the tree. You'll need to transition all the file, rights, etc. When you're done, load install on the NetWare 4.11 server and remove NDS. In NDS Manager promote the NetWare 5 server to a Master replica after the NetWare 4.11 server has been deleted.

This discussion is closed to new replies.