Question Locked

Must boot Vista twice to run properly. Why?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Recently, my laptop, after the installation of Vipre AV by the IT Services department, I am consistently forced to reboot the laptop twice to get it to run properly. Sometimes the first boot stalls out in the process, or sometimes it boots to the desktop OK, but when trying to do anything simple, such as opening a shortcut or file, it stalls out. If I do a forced shutdown using the power button, it will reboot to the black screen where I choose "Start Windows Normally". It then boots up normally and everything is fine. I always use the proper shut down procedure, going through the start menu.

I have reported this to the IT Services department, but they claim that the installation of Vipre did not cause this. I would like another opinion. Anybody have any ideas what is going on? Any suggestion for a remedy?

Thanks!

7 replies

by shasca

Go to the start button and type msconfig in the "Run" box. This will let you play with what is loading at bootup, both programs and services. Selectively shutting these down will give you some clues as to what is failing at startup.

If it is related to A.V. you will have the proof needed to get the I.T. Dept to fix it.

by rob miners

Check the problem history in the Problem Reports and Solutions control panel.

by tony hopkinson

The av is kicking in when vista loads the prefetch cache. Rebooting fools it into thinking it's already been done recently. Sounds like a weakness, but it will get scanned again when you actually load the app.

Best of luck with your IS department.....

by cccgsmith

Thanks to all replies. I am particularly interested in your reply, Tony. Can you explain more about the prefetch cache? I am unaware of it, but the explanation certainly seems feasible. Is there a way of verifying this to be the problem? Is there a way of modifying it, or is it programmatic?

Thanks for you input!

by tony hopkinson

Vista optimises based on usage patterns.

So applications you use regularly get sort of preloaded, so they come up quicker when you want them.
They are executables though so the a/v will can them when they get moved in to the cache and again when you ask for them.

You can tell your a/v not to bother with the directory windows/Prefetch.

Or you can turn it off. Personally I think it's much of a muchness, unless you use the same stuff everyday, and use boot up / loogn delay as a useful hint to get a coffee.

by rob miners

Open regedt32 and navigate to this key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters

Under this key you should see a value named: EnablePrefetcher

It has 4 values:

0 - Disabled : The prefetch system is turned off.

1 - Application : The prefetch only caches applications.

2 - Boot : The prefetch only caches boot system files.

3 - All : The prefetch caches boot, and application files.

Don't disable it. This will make the boot time longer. The use of Prefetch is used to speed up the loading of boot files. Select the number 2 option.

This discussion is closed to new replies.