7 replies
by richardbo Accepted solution
by oh smeg Accepted solution
To confirm this you should attempt to Boot with a Boot Disc like the Ultimate Boot CD available free here
http://www.ultimatebootcd.com/download.html
Download the ISO File, Burn it to a CD and try Booting off this Disc. If it falls over when you attempt to run a Diagnostic or even fails to load the Selection Screen Start off with a Known Good Power Supply and see what if any difference that makes.
Of course you may need to enter the BIOS and alter the Boot Order to Optical Drive or CD before the HDD and save the changes as you exit the BIOS.
If things work perfectly with the Ultimate Boot CD then you need to do a Repair Install of your OS which has been corrupted. If you have a Microsoft Branded Install Disc you can use Method 2 shown here
http://support.microsoft.com/kb/978788
If you have a System Makers Recovery Disc you can still try a Method 2 but depending on how the Recovery Disc was made you may not get the second R to select. ;)
Col
by tonyreilly Accepted solution
Great advice from OH Smeg, one thing to also try if you havent is:
Power off the laptop, turn it back on and press F8, this will show you the same screen that you will have seen Safe mode on but it will also include an option called "Last known good configuration that worked" this is a snap shot of the settings and configuration from the last time you make a sucessful login.
Cheers
by tyharo Accepted solution
by wesley.chin Accepted solution
by oldbaritone Accepted solution
and try to "repair."
failing that, reinstall windows.
by seanferd Accepted solution
turn off the auto restart on failure*. That way, you'll get an error message that can help diagnose the problem.
Right-click My Computer → Properties → Advanced → Startup and recovery settings → System Failure: un-check "Automatically Restart".
*Dumbest Windows default setting ever.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending