2 replies
by sanjay dhaka Accepted solution
by oh smeg Accepted solution
So to start off I would test the HDD with it's Makers testing utility, naturally this relies on you knowing who made the HDD
http://www.tacktech.com/display.cfm?ttid=287
If you don't know who made the HDD and don't want to open the case and look at the sticker on the HDD, try Seatools from Seagate or download the Ultimate Boot CD from here
http://www.ultimatebootcd.com/download.html
And use each HDD Testing utility till you get one that runs. Both links are free so there is no costs involved. ;)
If the HDD passes the Test you can then start going about repairing the Installed OS but if it fails the test you need to remove it from that computer connect to another computer and retest. If it fails the second test the drive has gone to [b]Silicon Heaven[/b] but if it passes the second test the M'Board, Data Lead or Power Supply in the first computer has failed and need attention.
Col
This discussion is closed to new replies.
Trending Software posts
Sort by Trending