22 replies
by mjt13 Accepted solution
by w2ktechman Accepted solution
If that does not help, download new chipset drivers for your MB, and then install that.
If it still does not work, It is best to purchase an add in PCI card. The card should be USB 2.0 for best results.
If you have a computer shop close by, I would'nt even worry about ebay, most shops should have some, and they are not expensive at all.
by mjt13 Accepted solution
by w2ktechman Accepted solution
by mjt13 Accepted solution
by sgt_shultz Accepted solution
i would first check to make sure cables are fully installed and no bent pins etc.
then i would completely remove the usb ports in device manager and reinstall them.
if you were paying me to work on your box i would start out by updating all the drivers, first the BIOS then the motherboard drivers....
by luckysoft Accepted solution
Dear, You Will need to install a new PCI External Card, Insha Allah you will be Done this issue,
Thanks
Lucky
by thumbsup2 Accepted solution
Doesn't anybody LOOK at the date of the posts they are replying to any more?
This thread is nearly 8 months old. Chance are, the people you are replying to won't ever SEE your reply, let alone understand what you said.
by w2ktechman Accepted solution
by joe9864_991 Accepted solution
by tig2 Accepted solution
by brownvibes Accepted solution
In response to the last few thinking that this thread is old, i agree...yet its useful. I had the same problem the other day, all my USBs stopped working for unknown reason, so i googled for an answer and ran into this thread...tried everything from reinstalling drivers, updating anything and everything, the works. Nothing worked.
This is how i SOLVED the problem (VERY SIMPLE):
My understanding was that there was no power for the USB, PC detected it but says its not working for whatever reason. SOOOO, I just turned the PC off, unplugged the power cord off the system for a min. or two, then put it back in and booted the system..VOILA! IT WORKED!
THIS MAY BE A ZOMBIE THREAD, YETTTT, it helps out others who may have similar problems.
by plantman54 Accepted solution
by tau247 Accepted solution
I too stumbled on this thread while doing a search for an answer to my problem and hey presto!! It worked! I have been tearing my hair out for over a week on this issue and have been unable to find a resolution - but this worked!
Thanks
by joe9864_991 Accepted solution
by jploessl Accepted solution
by ahmadfauzan Accepted solution
by jackventura Accepted solution
Yes, unplugging the power chord and then plugging it again resumed the USB ports at restart, for me too... great, thanks!
Keep on answering the old questions, too, as you can see there's always someone searching for an answer on the subject and it can be very helpful.
Thanks a lot, guys! :-)
by ianmiller Accepted solution
Since your computer was 6 yrs old, the USB ports may have physically worn out and are no longer making connection. So it is better to buy a new system rather than servicing the motherboard.
Regards
portable hard drive
by mr. satock Accepted solution
HI! ITS SIMPLE BY USING HEAT BLOWER
Just heat diodes near USB port, Southbridge, maxm assembleyour laptop and it will ready to use USB devices
by mr. satock Accepted solution
by rosalynddoneghy Accepted solution
http://www.youtube.com/watch?v=oyG9MOwPXz0
It solved the problem immediately.
Rosalynd Doneghy
This discussion is closed to new replies.
Trending Peripheral posts
Sort by Trending