Discussion Locked

NDPS Dropping printers

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am running NDPS on a Netware 5 server. I have users that loose the printer altogether or they see the printer, but can't print to it. Once I reboot them or reinstall the printer, it's fine for a few days and then it is gone again. It's not particular users. It is sporadic. I am running 95 as the front end.

7 replies

by dovmar

Try the document ID 2949178 from the Novell Techical support pages (support.novell.com). It speaks of an update to client 3.1 from a support pack. It describes 1/2 of your problem, those printers that dissapear in win95. I suspect the 2nd half mightbe solved as well.
Marty Block

by peachhaze

I would reinstall the latest version of Client 32 on the client pcs. Earlier versions of Netware Client 32 had problems of losing printers and a reboot would bring them back.

by de.almeida

- Correct client config is important, so use
the latest versions :
Novell Client 3.3 for Win9x
Novell Client 4.8 for NT/2000

- Protocol config on NW Client
Are you using IP or IPX as your preferred
protocol on the WS that fail ?

Correct server config is also important:

- NW 5 SP 5 is the latest, get it at
http://support.novell.com/misc/patlst.htm

- For bleeding edge (or if SP 5 doesnt
resolve your problem) look at Beta SP6

http://support.novell.com/cgi-bin/search/tidfinder.cgi?2957768

as it resolves NDPS issues post SP5 you
might want to install it.

Search Novell KnowledgeBase at
http://support.novell.com/search/kb_index.htm
for "NDPS losing connection" and read other
TIDs.

Hope it helps,
Joao

This discussion is closed to new replies.