Discussion Locked

NDPS Manager reports an error hp 2500

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
In the NDPS manager I have an hp 2500 printer that reports an I/O error. That is it no other details. At the printer itself there is nothing wrong yet no print jobs are getting processed. I shutdown the printer agent, kill all jobs in the queue and still reports the I/O error.

7 replies

by salmonslayer

Check your client version if you are using JetAdmin to configure this printer. There are some problems with HP and Novell clients for NT Workstation. I was having problems with a HP 4050 (would not connect to NDS) until I changed to NW Client 4.71.

by paladin

Not using NT workstations, not using jetadmin. Most of the PCs on the network are W98 client 3.1. I have tried rebooting the server with no change in the I/O error. I have 2 printers that are giving me the error now. One had ram problems before so I will check that but the other one is not. It is working fine as a local printer. I will try to remove the printer agent and reinstall with updated drivers to see if that fixes it. I hope so. Thanks for the response. Oh ya I just updated to the latest hp gateway 2.10a and that didn't change anything.

by morrison_j_e

In your reply to the previous answer you said that the printer was printing OK locally. Does that mean that it is not a network attached printer? If not are you using the latest NPRINTER for Win 9x?

by jimbb

Lots of problems like these are fixed in the latest service-pack for NetWare, which includes major updates for NDPS.

Jim

This discussion is closed to new replies.