Looking at the Acer support site, a BIOS update has not been released for your system.
Yes, there are third party vendors that right custom BIOS chips at your request. The last time I checked into that, it was more expensive than I wanted to pay.
I'm not that sure that a BIOS update will correct your problem.
I suspect that the memory you purchased has a higher density then is supported by your Acer. Look at your old memory. If your new memory has the same number or fewer chips on it, it is of higher density and may not function.
I have had good luck matching system specific memory at Memory-Up. They list 1 GB modules guaranteed to work with your system for about $40 each.
They do give the following warning:
"Your Acer AcerPower S280 only supports memory modules made with a specific type of chip. Should you find what seems to be the exact same memory modules elsewhere for a lower price, it is very possible that the cheaper memory modules will not work in your system. By using Memory-Up's Memory Finder, your selected memory modules are Guaranteed To Work or your money back"
You can also use the memory tools at major memory makers web sites such as Crucial, Kingston and PNY to identify the recommended memory for your system.
Interestingly, only Crucial lists your system. Here are the specifications they state for their compatible memory:
# Module Size: 1GB
# Package: 184-pin DIMM
# Feature: DDR PC3200
# Specs: DDR PC3200 ? CL=3 ? Unbuffered ? NON-ECC ? DDR400 ? 2.6V ? 128Meg x 64
The CL=3 and 128Meg * 64 are relate to the timing and density of the RAM.
Chas