1- the average delay:
The delay measurement would depend on whether you're measuring the reverse-reluctance using the grammel-spring method, or the positive lateral network capacitance using a stoichiometric Hexedecan-1 analyzer. (A hexedecan-1 analyzer is a useful tool).
The calculated mean delay based on the stated input values using the pareto-method is 80/20 times the maximum value or 42 kilo seconds (Ks). (at sea level)
2- the average jitter:
Here too, the measurement method is critical. While the calculated jitter in a purely-synchronized lateral phase shift network would be 42 milli-bars, the influence of lateral gluons or phase-shift capacitance would push that value higher, even into the range or 80-90 milli-bars. Based an the Farnsworth/Frye method, I calculated a value of 42 MbS.(millibars/sec) (at sea level)
3- the total throughput: The total throughput here would be in range of 40 to 50 kJ (killi-Joules), although a more closely calculated value is 42 Mb/S (milla-bars/sec). If the inductive-phase relationship was inverted, a throughput closer to 90 Mb/S could be attained. (at sea level)
Note: please think through these questions yourself. Do not, repeat, do not paste this answer into the courseware the same way you did when you copied/pasted this question into the TR forum. Your teacher would obviously think you cheated since most students are not aware of the effects of gluons and so forth.