Question Locked

Need help setting up a VPN on Server 2008 R2

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have tried following a guide:
http://www.petenetlive.com/KB/Article/0000103.htm

But I am able to create a connection from a client. I am not sure what I am doing wrong.

My router is a DIR-655, and I think I have it configured correctly.

Here is the error the server records when I try to connect:
"The user DOMAIN\administrator connected to port VPN3-127 has been disconnected because no network protocols were successfully negotiated.

Please help, or tell me what other information I should provide.

5 replies

by ditchmagnet

I have IPSec (VPN) checked, and I also added protocol 4 to the virtual server list (47 is also on the virtual server list). Still not working.

I haven't setup and CA or anything. That was not in any guide I found. Do I need to do that?

EDIT:
I have just put the computer in the DMZ and it still will not work.

by ditchmagnet

The server has a static IP of 192.168.0.198

All ports listed are forwarded to the server.

PPTP - 1723 (TCP)

L2TP - 1701 (UDP)

GRE - (no ports) Protocol 47

IPSec - 500 (UDP)

GRE? - (no ports) Protocol 4

I will try that PPTP tool next. My router at home allows me to create a VPN connection to my laptop from my netbook. Maybe I will try my home router (wrt54g running DD-WRT) in the dlinks place and see what happens.

EDIT:
I am running the PPTP tool, and it is just stuck at "Listening on PROTOCOL 47 for incoming GRE packets..."

This discussion is closed to new replies.