15 replies
by rush2112
Too many variables on how each ISP sets up their circuit to work. Too many brands of equipment to select one size fits all.
option 1:
Buy the equipment yourself, configure it yourself, send it to them after you test it and know it works using their settings (this requires that you have the same type connnection they do) Lock them out with admin password.
Setup remote access to non-standard port with secure password (do not share with users)
Option 2:
Hire a contractor at each remote to set it up for you, work with contractor to get it set.
Bill end user for support when needed.
Option 3:
Call Cisco consulting. Spend money, Cisco will provide you with a solution.
by the ole coon
My cable modem service provider requires you to use their cable modem. They also, as part of the installation package these days, will supply you with a wireless router, and at least one wireless NIC to connect to it. They even stick around and make sure it works before they roll on to the next customer.
You're outta luck if you don't like it...
When the lights stop going "blinky blinky" you call the helpdesk of the ISP that put the system in. The ISP in my area staffs a call center 24x7 to handle "The idiot unpluged the power" problems.
Also, keep in mind that there are multiple potential home ISP solutions out there ranging from DSL to FIOS. I'm punting Cable Internet as soon as Verizon finisheds digging up the neighborhood laying fiber.
I can't see a winning cable modem solution for you.
Good luck.
by jdclyde
or are they using their own equipment?
If they have a company laptop, just put on a software firewall (not the MS firewall either).
Run the corporate Anti-Virus, administered from a central server.
Lock the system down so that the user does not have Administator permissions.
Run a spyware remover.
Then setup the laptop to VPN into the system.
With this system they can get in regardless of if they are home, in the office, at a hotel or up at the nearest deli having lunch.
If you want to have a router at their home, make the road trip to their house and set them up. It will often take less time and frustration (on both yours AND the endusers part!). Doing this will also create a lot of good will among the users as well which is always a good thing.
I would stay away from the $30 specials unless you want to have to go visit them later on when it pukes on them. Get a higher end system and plan on about $150 for a starter system depending on if you need any more features than a firewall.
And you call yourself an "IT Manager" ????? Sure that is what you really do? You sound a bit arrogant (swanky home...maid). Sounds like your supposed telecommuting users are not the only ones who are not techincally savvy. Who would hire you?
Your story is full of holes. It is total BS. Why don't you confess and say 'I said I knew all about this stuff and now they have asked me to prove it'.
Why don't you stop pretending and go back to what you know how to do? Don't try to play with the big boys unless you have the knowledge and tools.
by jdclyde
He never said he was a tech. Probably used to be in the Accounting department and got the IT-by-default title.
Not that uncommon for smaller places that don't want to pay a person full time to do computers.
by jamesrl
There is a great breadth of knowledge within IT. Maybe he is a great programmer, who always relied on someone else for hardware.
Besides, what does it hurt to ask. There is a great amount of knowledge in posters here, why re-invent the wheel if someone else has tried to implement something similar, and has learned some lessons. Thats what a community is all about.
I've seen lots of cable modems that have no buttons or switches - but most are accessable either by telnet or even a web session to a configuration screen - if you know the password. Obviously some are more secure than others.
Of course its easier for you to make fun than to help.....
James
by jdclyde
if I am starting to sound like James, or if he is starting to sound like me.
Either way, that is a SCARY idea at best!
And as you are saying ALMOST WORD FOR WORD what I posted about being a programmer, I find I must completely agree with you James. A stroke of genius on your part!
by jrod86
If the user's are telecommuting from homes with existing connections, make them fill out a form that describes there connection. Ask if they have Cable or DSL (if it's cable it will probably be a dynamic connection, if it's DSL then you may need the username and password for their connection to configure in the router). Lock the router with a DIFFERENT admin password than the stock one (anybody can find the factory default password).
If the user can't answer your technical questions about the connection, they can call their ISP and they will answer them. The company I work for has been doing this for a few years, and I designed the form and questions so that they are as simple as possible, but these are still technical questions that your users will need help answering.
by the admiral
Your fighting an uphill battle in that the cable company reserves the right to do that, and will not give that right to a corporation or any other entity in order for them to make changes.
First, I think that you have to seperate duties based on where the location of the equipment is. Where we are, we have a clear policy of "If it is owned by us it is supported by us, if it is not owned by us, we do not support it." That includes peoples personal digital devices or other methods of peripherals. It has to be purchased by the corporation for it to be supported by the IT group PERIOD.
Second, you may have to contact the support for the cable modem in order to find out if there is a direct number that the end user can call for support. Then hand them the number, web site and other information.
Third, in the background, you can come up with documentation on how to configure the router that connects to the wireless router or router to hand to them, but ensure that outside of updating the documentation, that they will need to have a sitdown talk with whoever is farting around with their equipment because it is no longer supported by the corporation.
It is a wake up call, but since the ISP is not going to cooperate with you, you have to make it inconvenient for the user so that they stop the practice of messing with their gear.
by dr dij
cable modems all you can do is power them on/off or plugin power, net, cable. there are no user controls.
cable router: they usually only have power on/off button and ethernet connections. what is more idiot proof than that?
you can lock down the config with pwd, but idiots will never access this w/o doc, via web page usually once connected
Thanks for stating the facts. When was the last time you saw a modem that had switches to flip? 20 years ago? My modem and router have power-on switches only.
ccweems says "I must support telecommuting users who are not technically savvy" It appears that he is the one who is not technically savvy. How did he become an IT Manager? (or is he really one? is that just wishful dreaming on his part?) I pity the company he works for. With his technical knowledge, it will fall farther back into the abyss he has led it into. ccweems, here is some help for you - get a job that you are qualified for.
by jdclyde
Got to give people the benifit of the doubt. Maybe he is a GREAT programmer that has just never worked with wireless?
Lots of reasons people could be in his position, and not all of them are bad.
If computer equipment were idiot-proof, many of us would not have jobs. Expose yourself to as much different CPE as you can and work on your customer service. IT is a SERVICE INDUSTRY that depends on the CUSTOMER!
We should be glad that CPE is not idiot-proof. As many other posters have said, it is as idiot proof as it will get already. Nothing will solve your "unplugging" issues, as everyone moves CPE. Luckily plugs for broadband are very simple (coax, power, ethernet) and easy to troubleshoot.
As for your "tinkering" problems, that is easy to fix by implementing a strong password for the router. If a kid wants to hack into the modem or router, chances are that the customer has got bigger worries.
I've never heard of remotely managing a broadband modem (not that there's much to manage), but if your customer's router has VPN support, you can set up remote management quite easily. Unless you set them up with DDNS you may have to keep track of their IP addresses in case their ISP's DHCP changes them.
by brazen1
by jamesrl
At least in the next previous post....
As for sounding like me, its nice to see you have come around to reasonableness....Now if you start to sound like Oz, there are some good doctors I could recommend.....
I work in a department full of hardware geeks. We have people from all of the company come to us to ask questions, even though they may be subject matter experts in many areas. I will admit, I don't know much about the accounting interfaces on some of the big systems, but I do know about the hardware they run on. I don't expect all of the programmers to know much about hardware. But together we are a team and can be more than the sum of our parts.
James
This discussion is closed to new replies.
Trending IT Employment posts
Sort by Trending