Discussion Locked

Need to find an IP address

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to find the IP address of a device on the network but I only know it's MAC address. How can I use this to find out the IP address?

5 replies

by dave.osborne

If you can get to the "device" i.e. if it is a computer's nic, then on that computer, start->run->cmd and type "ipconfig /all "... it should display both the MAC and IP

If you can't get to the device, then on the server which it is connected to,try start->run->cmd and type "arp -a" ... look down the tabel to find your MAC and then the corresponding IP

Let me know if this helps ... if neither does, you cuold always try to download a program that will look up MACs on your network and giveyou IPs ... try www.download.com and type in "MAC IP"

by joseph moore

Tim:
Yes I agree, looking at the ARP cache on your machines is a good way of finding the IP you are looking for. Just remember, you have to look on machines that have connected to this rogue machine in a relatively short amount of time (I think 12 hours is the default purging of ARP entries).
If you can check your switches/routers, they will also contain this info. That might be a better place to start.
But, if you need a server/workstation option (if you can't check the switch/router), then you can also try GETMAC.EXE from the Windows resource kit. That tool works against remote machines, and gives you all MAC addresses for them.
GETMAC \\REMOTEMACHINE
You could do a NET VIEW in your domain, pipe those results to a txt file, then open the file, add GETMAC in front of each machine name, save the file as a .BAT, then run that file, and save those results to a 2nd txt file.
Then just check this GETMAC results file for the MAC you need.

hope this helps

This discussion is closed to new replies.