Question Locked

Need to transfer the PIX 501 config to a PIX 515...

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

So I have a PIX 501 that is questionable as far as reliability. I have been sucessfully able to backup the config to a text file on a tftp server. But when I go to restore the config to a newer 515 it seems that it doesnt see that backup as a PIX image file.

Does anyone know if this is even possible? I would imagine that it would work but have been successful at it. Im just looking to move this config to the other pix. I tried copy tftp flash and filled in all appropriate info but it errors out on copy.

4 replies

by retro77

I wouldnt copy the image file, I would just run the commands [config], line by line into the 515.

I think there is information in the config files as to what model/platform it came from.

what I typically have done in the past is copy the config from my terminal window, into a test file. Just hightlight, copy and paste.

I know in routers I could just paste the config right into a new router and it was configured, I dont remember if I could do that on the PIX.

by rmacys

Yeah, I ended up just doing that and It seems to match the other config now. Im going to test here in a few mins to see if it worked or not. It has 6 tunnels so I may need to tweak a bit before it works though. Thanks for the help

Rich

This discussion is closed to new replies.