10 replies
by dhart131 Accepted solution
by markp24 Accepted solution
hi,
i have done similar with netgear 3500 routers, 3 or them, one set as the primary and 2 set a repeaters. Linksys(cisco) are alwso very good. I am not familiar with Dlink but from what it sounds like, you may be safer buying a netgear or linksys that has compatible repeaters.
by dhart131 Accepted solution
by robo_dev Accepted solution
That would be low-cost solution to try.
On eBay I'm sure you could scrounge some good used Cisco gear for a reasonable cost. Cisco stuff allows you to operate an AP as a bridge, a repeater, or a bridge with local clients.
by dhart131 Accepted solution
by markp24 Accepted solution
by dhart131 Accepted solution
by Member 29694596 Accepted solution
by thechas Accepted solution
I have purchased from Cyberguys in the past, but find their prices to be on the high side.
For any type of repeater, check out www.solidsignal.com
Order fulfillment and support are prompt.
Chas
by markp24 Accepted solution
I ran across these papers for extending the fios wireless networks. So I would like to try and help you guys get thiose wireless networks working.
thought that may be usefull to you
key points:
??? First Router
o 192.168.1.1
o DHCP to use the range 192.168.1.3-192.168.1.254
o A wireless channel like 11
??? Second Router
o 192.168.1.2
o DHCP is disabled
o Identical wireless security setup as First Router
??? Except the wireless Channel. Try channel 6 if the first is 11.
o Plug hard-wire into the LAN port, not the WAN port.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending