Networks

Ask something
Discussion Locked

Net Gear LAN CARDS

0 helpful
5 replies

by blairma

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to use a netgear FA 410 as the lan card on a copmpaq presario 1245 I can't get the card to bind with TCP/IP it is a 98 machine, I am running a NT domainI would aprecaite an ideas at all

5 replies

by robert_a_mocarski

I use lots of these cards and have never had a problem binding protocols. I have seen problems with the protocols themselves becoming corrupted. This has usually occurred when I have had netbeui or IPX installed with IP and then deleted netbeui or IPX. The IP protocol then became nonfunctional.

Try removing all protocols and network cards, then boot into safe mode and verify that there are no phantom NICS installed. Remove all, reboot, and reinstall the NIC driver and network protocols.

This discussion is closed to new replies.