Question Locked

NetLab

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am lost in trying to figure out the commands that are necessary to sign into NetLab. Enrolled in CCNA Semester 2 and have the NetLab, which requires logging on and the commands are something I am not familiar with.

Can someone please help with this login procedure by instruction or helping with commands.

Don Leonard

5 replies

by ic-it

to get a hold of your instructor. Netlab is usually set up on a server. You will need an account and the password.

by ddleonard

I already have the account and password. The problem is when it starts I don't understand what commands to use in order to get the program to run.
Please be patient as I don't understand any of this and am getting ready to drop this quickly.

Don

by ic-it

will depend on the simulators you have to run. Usually after logging in you will access a simulation and then issue commands to routers and/or switches.
Surely the instructor has lab manuals or use the Cisco books to see the commands. Alternately, once you access arouter at the prompt type a ? to see a list of commands, or type part of the command and a ? examples can be found here.
http://www.netlab.tkk.fi/opetus/s383133/Cisco-How-to.pdf
or here;
http://www.google.com/search?hl=en&q=Cisco+router+commands

by ddleonard

No the only thing we have is the online manual of how the lab works and the CCNA online academy. I am taking the course online so my access to information is limited needless to say.

I appreciate your response and would you mind if I email you with further questions if they arise?

Thanks again,

Don

This discussion is closed to new replies.