Discussion Locked

Netlogon

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Has anyone seen the Netlogon error 7023. The specified module could not be found. This is a BDC in a domain with 5 other servers. All servers are running SP6a. Thanks in advance for the help.

5 replies

by xiajs

1. Start the BDC, and open Server Manager
2. Select the BDC's name, and select Synchronize with Primary Domain Controller.

by keith g

I have tried all of that. I have even tried to force a sync of the secre channel. It ended up being a missing netlogon.dll. I noticed this after using netdom and noticed the error message of RCP_UNAVAIABLE_IF. This means an unavailable interface.

by xiajs

TechNet maybe help you.

However, if the BDC will not synchronize and Netlogon fails to start after three
attempts, you should create a new machine account for the BDC. These
instructions are taken from a related article, Q137987:

1. Using Server Manager, create a new computer name.

2. Synchronize entire domain (check another BDC's event viewer to see if it
synchronized).

3. At the problem BDC, use the Network tool in Control Panel to change the name
to the new name created in Step 1.

4. Shut down the BDC, restart, and log on to Windows NT. Note any error
messages. You must logon to the domain the BDC belongs to, not a trusted
domain.

5. Using Server Manager, synchronize the entire domain.

6. From the PDC, delete the old computer name(use Server Manager).

7. Synchronize the entire domain, using Server Manager.

8. Make sure the old BDC name has been deleted in Server Manager before
proceeding.

9. After the old BDC name is gone fromServer Manager, re-create it.

10. Synchronize the entire domain, using Server Manager.

11. At the problem BDC, change computer name to the old name created in step 9,
using the Network tool in Control Panel.

12. Shut down the BDC, restart, and log on to the domain. Note any error
messages.

13. Synchronize entire domain.

At this point the BDC should be synchronized with the PDC, netlogon should be
running, and the accounts database should be up to date.

by ghstinshll

Do a search on Microsoft's TechNet for this error. Put the error string in "quotes" and search. It'll tell you all about the error, what caused it, what the symptoms are from it, and how to fix it.

TechNet is really great!

by tomsal

Technet is a good resource to turn to when you are really stumped, however, in my several years of experience less than 5% of all problems I must contend with are solved (or even found) by Technet.

Not saying not to use it - just telling you whatreality is.

later.

This discussion is closed to new replies.