Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Our network currently runs Netware 5 servers and IP and IPX is allowed on most subnets at present. Recently additional subnets have been added which are IP only. Win98 PC's on these subnets currently run Netware Client V3.21. They do not display aNetware login prompt unless the Preferred Server is set in the Client Properties and the server name is in our DNS tables (if not part of DNS then the IP address of the server needs to be used). The routers are multicast enabled and a sniffer indicates that the multicast packets are sent on booting the PC's but no replies come back. Have tested an IP only PC on a subnet with a Netware 5 server and a login prompt appears on bootup, but if the login has to go across to a different subnet then the prompt is not displayed unless preferred server is set. Is this normal? I was under the impression that when NDS came in Preferred server was reduntant after Netware 3 and Preferred Tree was the option to use. I suspect its a routing problem butam open to suggestions
7 replies
by acurrin
I haven't had to troubleshoot this problem as deeply as this, but I would review the service location protocol configuration options under NetWare 5. The preferred server is not required, but the machine does need to be able to locate the tree before a server within the tree can respond.
Good luck
The question was auto-closed by TechRepublic
by sleeper
When you say the question is answered, what was the cause and how did you get it solved?
Thanks for replying.
The question was auto-closed by TechRepublic
by emcgrat
RIP being IPX and not being routed I beleive you need a Directort Agent running on a 5 server. Point your PC's to this DA via your client, Service Location tab.
The question was auto-closed by TechRepublic
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies