4 replies
by alan
by collins_ms
by gregc
Make sure the Jetdirect firmware is at the latest level. My guess is it probably is several releases back. You can get this info from the printer by printing a test page. It will list what type Jet direct card you are using and the level of the firmware on the card. You can then go to HP page at http://www.hp.com/cposupport/jsnav/netprn.html and lookup the latest firmware. You will need to download the latest firmware and use HP's download manger to download the latest code to the jetdirectcard. I would also make sure my server was running the latest Service Pack SP8A. At the time the problem is happening you should go to the server console and type DISPLAY SERVERS and see if the HP Jetdirect card is on the list. If it is not you have some kind of communication problem with the printer. Then I would check cabling, hubs, etc.. Hope this helps
Greg
by collins_ms
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending