Networks

Ask something
Discussion Locked

NetWare 5 SP

0 helpful
5 replies

by ddunkink

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
When I try and install NW5SP5 on my NetWare 5 server at reboot I recieve the error Server-5.0-4631 { nmID=1001c }. The problem is caused by the Adaptec IOMGR.NLM that is loaded to support the RAID . Hardware is INTEL N440BX dual 500 with Adaptec AAA133U2 card in Raid 5 configuration. If I comment out the IOMGR.NLM line in the autoexec.ncf the server loads fine. I really don`t want to run without control of my array.Any Ideas for a fix to this ??

5 replies

by malibu81

Two options check the files that nw5 spk5 updates... if this file iomgr.nlm is replaced by spk5, then re-install the origional driver provided by hardware vendor. If this is not the case then look for an updated driver from the hardware vendor. If the hardware vendor cannont provide a solution or fix contact novell.
if you do not have support they have a minimal fee. around $300.00.
Option, if you were not having problems with the prior service pack and you selected to backup you files justuninstall spk5 according to novell's TID on spk5

NetWare 5.0 Support Pack 5 (Last modified: 31MAY2000)
TID#(2956725)

Hope this helps
F. Kopitskie
CNA 3.x,4.x, CNE 5.x in progress

by bchesmer

Here is te link to the latest files for your card from Adaptec. Also, the second link listed has addtional info. Hope this helps you out. There was nothing on the Novell support site for the file u mentioned.

ftp://ftp.adaptec.digisle.net/raid/aaa/aaau2_v42034_drv_nt_nw.exe

http://www.adaptec.com/support/overview/aaa130u2.html

An addtional note: if u are useing NDPS, you may want to look at this TID on "support.novell.com" in their knowledge base. The TID is 2949301.

This discussion is closed to new replies.