Discussion Locked

Netware 5.1 Replica problem

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have recently upgraded from NW3.x to NW 5.1. We have 3 servers, MON1 MON2 and EH1 (2 locations) in the tree with a single partition and a master and two R/W replicas. There are approx 150 users.

Objects created on the MON2 replca are not being syncronised with the other two but it does receive changes made on either of the other replicas.

The objects created on the MON2 relica show as 'unknown object' (yellow question mark)on the other two.

Service Pack 2a is installed on each server.

Would appreciate any help on this.

3 replies

by jimbb

An unknown object probably means that the name is there, but no properties yet. Check via NDSMGR32.exe in what states the replicas are. Right-click a replica, and select "partition continuity". This indicates what each server thinks about other servers and their status. Click every field there to check for possible errors.
By the way, is time synchronised? Type "time" on all servers to check this.
Have you run a basic DSREPAIR? This may come up with a number of errors, and fix some. Itmay also be so that one or a few servers have incorrect network information about each other. Run "Repair all network addresses" in DSREPAIR on all servers to fix this.
These are a few basic first-step things to do, I need more details (is time insync? for example) to get closer.

Jim

by jenks

Thanks for your reply. Time is in sync. Partition Continuity showed MON2 to have errors. DSREPAIR status showed two print queue objects with -613 error. Deleted and recreated the object and it works ok now. Thanks again.

This discussion is closed to new replies.