Discussion Locked

Netware Client32 Boot nDisk For Dos/Win

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to create a dos boot disk to connect my note books to the network, but it keeps hanging at file server not found. So can some one show me an example net.cfg, startnet.bat, config.sys, and autoexec.bat files configurations for this project.
Thanks.

5 replies

by dle

Here is a sample for 3Com 3C509 card.
autoexec.bat:
--------------
@CALL STARTNET.BAT
f:\login

STARTNET.BAT:
-------------
A:\NWCLIENT\LSL.COM
A:\NWCLIENT\3C90X.COM
A:\NWCLIENT\IPXODI.COM
A:\NWCLIENT\VLM.EXE

NET.CFG:
--------
Link driver 3C90X
Frame Ethernet_802.2
Link Support
Max Stacks 8
NETWARE DOS REQUESTER
; PREFERRED SERVER =
FIRST NETWORK DRIVE = F
USE DEFAULTS = OFF
LARGE INTERNET PACKETS = ON
PB BUFFERS = 10
VLM = CONN.VLM
VLM = IPXNCP.VLM
VLM = TRAN.VLM
VLM = SECURITY.VLM
VLM = NDS.VLM
VLM = BIND.VLM
VLM = NWP.VLM
VLM = FIO.VLM
VLM = GENERAL.VLM
VLM = REDIR.VLM
VLM = PRINT.VLM
VLM = NETX.VLM

Check your NIC'sdriver disk under ODI, or NetWare, or NWClient for the needed files and sample Net.cfg file as well.

This discussion is closed to new replies.