Discussion Locked

Netware - Identify ips and macs of works

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Novell 4.11 network for american greetings corp's distribution center , Win 95 workstations, 3-400. My documentation for assigned ips and macs is out of date. Does anyone know of a utility that will identify these addresses or scripts thatcan be created to provide info either through login or with a call in utility?

thx, guy graham

15 replies

by paul.gerth

Methods - Look at the server console / connections and see each logged in user with their Network/station address , painful but works in a pinch
- Use Session and pick the user and see their MAC
- Use Nlist user /A | will show all the logged users and their MAC
Tools - Download the trial version on Flukes Network Inspector from www.fluke.com , and run a report on your network . Great but $$ to buy
This will also show the users IP address , netbios name , IPX name and
just about everything else . I have no affiliation to Fluke , just love the SW.

by crousos

Check on the IPSWICH websiteYou only have to turn all the PC's on and scan for all IP's on your network.The website is www.ipswitch.com and the software is Whatsup GOld you can download a free eval. It does many more things than what you need but itwill scan you network for all IP

by white wolf

Can't remember if 4.x has nlist, but when everyone is logged in, I usually do a
"Nlist User /d > details.txt" and look through the file and piece it together that way. But with 400 workstations, you'll need something like monarch to strip the dataout and consolidate it into a report.

Good Luck!

by jeff_hurst

I used a command called NBTSTAT -A (ip address). This command is part of windows.
I wrote a couple batch files to give a starting IP and an Ending IP so it could scan all numbers inbetween and send the output to a file.

This not only shows you IP an Mac but also who is logged into the computer at the time of scan, the workgroup assigned, computer name.

To test it go to dos and type:
nbtstat -A (ipaddress without brakets)
use your Ip address and see the results.

If you want a copy ofthe bat file I made email me asking for it and I'll send it to you.

This discussion is closed to new replies.