Discussion Locked

Netware queues on NT

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a couple Novell 312 servers that I am replaceing with NT. I want to know how can I have my in-houe legacy applications that point to Novell print queue now go to NT printers. My old apps send data out lpt1 where they are sent to a Novell queue. Can I define a novell queue on NT. My gaol is to remove the Novell servers

5 replies

by dcassat

Most of the work I have done has been in the migration of Netware 312 to NT 4.0. In summary the process is as follows:

1. Create a printer on the NT server that points to the printer. TCP/ip can be used with the LPR printer service.

2. Share the printer from the server.

3. In a login script or batch file you use the command net use lpt2: \\server\sharename. Your DOS programs can then print to LPT2: (in this case).

You can use lpt1 2 or 3 and replace the word sharename in the above example to the name you gave the printer at the server. Try the command from a DOS prompt and you'll see how it works. This will cause all of the print jobs to be queued at the server. There's more detail of course, but this will get you started! Good Luck.

by notnot

As dcassat said. You can also use printer pooling as an alternative to 'net use'. In NT Workstation you create a network printer, attached to a network "port". Then enable printer pooling, and make sure that both the network port and lpt1 are checked. When an application tries to dump something to lpt1, NT will see it as unavailable and redirect the print job to the other printer in the pool.

This discussion is closed to new replies.