Discussion Locked

Netware Server Reinstall

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I was running Netware 4.1 on my server and thought I no longer needed it. I installed Windows 2000 Pro to run as a webserver.I Found out some info on the server was still needed and could not read the data without Netware 4.1 . Can I convert back tomy old network operating system without having to completely reinstall Netware? In other words be able to undo the Windows 2000 Pro installation and have my old operating system back on?

7 replies

by jimbb

You are talking about 2 different operating systems, with different types of partitions. And as soon as partitions are replaced and overwritten, their data is gone forever.
You may be lucky if you're using the same backup software, and the W2K version can read the tapes from the NetWare version... Otherwise I suppose the only option you have is to reinstall NetWare, backup software, restore tape, copy files, and re-install W2K.

Jim

by btimber

Even if your backup system could read the tapes the data format is foreign to windows.

If you only need a discrete piece of data you could install 4.1 on a workstation or other machine into which you could also install you tape system (if it is external or you have a spare tape drive your would be in real luck) switch the tape machine to the new "servers" place the data you need on this server and then deal with it.

by wcraigmiles

You will need to create a partion formatted for netware. Go to the timpanagos site and donwload the dll kit and install it. Find a place and create a partition large enough to hold your backup. Now you will need a backup program that can read thetape format. if you are using one of the mainstream programs like Backup Exec or Arcserve, the desktop version or enhanced version will read the NW tapes and allow you to restore them to the newly created Novell partition. If the backup software does not have a Windows version, then you will be stuck and have to go to the create a new server route. Once the software is installed, you might have to reindex the tape before you can do a restore. This will take lots of time no matter the tape or workstation hardware. Once the tape is reindexed you can restore it. If there is a windows version ofthe backup software, you might not have to create a novell partition and you might be able to place it anywhere onto the drive.

This discussion is closed to new replies.