9 replies
by mike99
by phc
there is two aspect on your question (how to connect and how to use your "remote application")
from a connectivity solution there is several solutions :
1/ if you have a fixed IP adress at home, program your firewall to accept inbound connection from your home fixed IP address.
2/ connect a modem to the com1 port of your NT4 machine and then to a local phone line. then setup the RAS server on NT4. Take care with this solution as you have no firewall on this line, if anybody know this phone number, he can log and then try to guess your userid/password.
3/ use the VPN solution as explained already in another answer
On the application level you need to use a software on your NT4 and on your machine at home.
Several commercial products exist (on from Symantec, Carbon Copy, and so on...)
One of them is free and work perfectly well check at http://www.uk.research.att.com/vnc/
I hope this answer is clear enough !
by mike99
by vicmen23
The first 2 posted answers would work very well. This is just an alternative which can also be very helpful.
You can setup a router or an access builder. Attach your modems. Configure its ip addresses to be the same as you internal network. You can setup authentication for security or you can even setup filtering.
Configure your modem to "autoanswer"
In this way you can allow more remote users to connect to your network and you can manage it more efficiently.
by mike99
by alza3eem
by mike99
by mike99
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending