Discussion Locked

Network Bandwidth Utilization Metrics

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am curious as to the types of metrics one looks for in assessing the current state of a WAN. Certainly, % bandwidth use, % use by protocol, % use by site, etc. What other metrics are useful in determining the current state of a WAN?

5 replies

by ckilday

Joel,
For WAN links, check out error statistics as well. If you've got errors, you're getting re-transmissions which slows response time. Check for carrier drops or interface resets on your routers. They indicate a flakey circuit. That can cause re-synchronization, dropped sessions and lost time and productivity for your users. If you're buying bandwidth from a carrier, check out their report on the circuit. Most carriers commit to a specified percentage of uptime and usually keep track of something called "errored seconds". If there are a lot of these "errored seconds", you might be due a rebate on part of the circuit cost. It's also good ammunition to push for a fix from them. You need the circuits to be healthy so you can get accurate readings on your bandwidth utilization, etc... Hope this helps.
- ck

by mel "blazing_saddles" dundee

You haven't been very specific as to where you want to look at these issues.
Do you have access to a router?
If so what type is it?
If so what protocols are you running?
What are your WAN links? This determines mibs or commands you would use.
Are you using a sniffer?
Have you looked at packet shapers between your WAN and Main site LAN. New Application management packages are now available for Layer 7 management.

Factors to look at in routers include buffers,memory, cpu utilization aside what the previous answer has given on interface stats
Accounting is a useful tool.
Collisions are also important to watch on LANS
Traffic shaping (for Frame Relay) from a central site to Tail sites will improve performance out of site on busy links in a central to tail site direction where multiple sites are employed and bandwidths of links vary.
Queuing strategies can be investigated
Compression can be considered

This discussion is closed to new replies.