Discussion Locked

Network Boot Disk

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
In the company I work for, many times we need to create a network boot disk that will allow us connect to NT domain and access shared resources, so we can install the OS of choice. We usually use Network Client Administrator utility that comes with NT. However, sometimes there is no NIC driver for our particular NIC in the list provided by NCA. Is there a utility that will create this disk for us by just supplying a correct driver and the Domain configuration information? Or, perhaps, is it possible to "add" the correct driver to the list in NCA utility? I would prefer to get a name of a freeware or shareware utility, but if there is no such utility, I will consider spending some money on commercial software. Please help.

4 replies

by mckaytech

The easiest answer is to add the NIC driver to the floppy and change the appropriate device=xxxxxx.sys line in the config.sys file.

The only time I've had trouble with this approach is when the NIC driver is too big to fit on a 1.44meg floppy along with the other required files.

I'm not aware of any automated method for doing this but perhaps someone else will be able to offer that piece of the answer.

paul

by robshan

To add drivers to the NCA see MicroSoft KB article Q128800. As for automating the process I'm not aware of any software but at the least the process above is a one off per new NIC.

This discussion is closed to new replies.