Discussion Locked

Network Browsing Problem

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have seen several discussions regarding problems with browsing an NT/2000 based network, but did not see any useful answers, so I'm starting a new one with a little more detail. Hopefully, someone can tell me what the problem is.

I am running an NT 4.0 PDC/BDC LAN with about 150 nodes. Clients range from NT Workstation, W2K, W98, and WinME. NTWS and W2K never have problems browsing the network, but some Win98 clients would lose the browsing capability all of a sudden. Opening the Network Neighborhood shows the Microsoft Network icon, but no computers will show under it. However, all available resources can be reached by using the network path. The protocol being used is TCP/IP only. It's a bit of a mystery to me. Any help on the subject will be greatly appreciated.

2 replies

by sbworks

TCP/IP name resolution is a mixed bag between WINS, DHCP and DNS. I've noticed that if you're not running NetBIOS, W98 goes dumb if the DCHP and WINS services aren't on a fast enough machine.

With 150 nodes, you can always check to see if there is a gateway mis-match between subnets, but that would probably be more consistant.

Hope that helps

by chemlab1

but do you have netBEUI and ipx/spx installed, if you don;t have netbeui on all of the clients they cant see each other

This discussion is closed to new replies.