Discussion Locked

Network Client 3.30 Hangs up

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I updated a network client from V2.51 to V3.30, and after the machine rebooted the login window freezes. This is a Windows 98 second edition workstation running on a Novell 4.11 Server. When I press Ctrl-Alt-Del and I end task on nwrecmsg (not responding) the login window becomes functional. After login, I get another program not responding (DPMW32). I have searched Novell's knowledge base but did not get any hits regarding this problem.

6 replies

by dprivette

Try to reinstall the Client again first uninstalling the current. Do a custom install and make sure that only the required fields are selected, deselect all others. Continue with the install, reboot and see if this works.

by volovoy

I can send to you NetWare Client 3.10. I know it's old, but it's more stable and we don't have any problem with this version. We have Novell 4.2 & 3.12 ans w/stations W95/W98. By the way, what service pack of Novell are you running?
Alex

by bart777

I agree with answer #1, but you may need to do a little more house cleaning before you reinstall. We just finished a 1000+ rollout of the new client and found that the custom install with only NDPS (If you are using that) and no other items seems to work with no errors. The Workstation Manager(Mangler) seems to be the culprit most of the time, but the imager caan olsa get in the way. After you uninstall the client go into the registry and remove any references to the WM from the HKLocalMachine\software\Microsoft\Windows\Current Version\Run through RunServicesOnce. then you can reinstall the stripped down client and you should be fine. We have had no problems with the client on the machines that we did this with.

Best of Luck..

This discussion is closed to new replies.