5 replies
by rich
I really wish they didn't call them "collisions". If I'm hearing you right, it's nothing serious -- a collision is something perfectly natural and within normal operation of an ethernet network.
A collision occurs when two ethernet signals are sent at the same time. The devices then pick a random interval to resend the packet. That's how ethernet works across a hub. Nothing scary, it's just part of its operation. If you get LOTS of collisions, then you eventually get performance degradation. Consider buying a switch if that's the case.
Hope that helped. =)
Cheers,
Rich
by den_espe
by matkinson
A continuously-on collision light is a bad thing. On your network, where the ninth machine makes the collision light go on continuously (where before you rarely saw the light on), you probably have a jabbering NIC. Jabber is the condition where a NIC won't stop sending signals, even when it's supposed to.
If this machine and its NIC works on your switch but not on your hub, you may have a polarity problem or some other issue that the switch is smart enough to correct for, but that the hub can't. Is this a manageable switch? If so, is it telling you anything about that port?
by den_espe
by den_espe
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending