Networks

Ask something
Question Locked

Network Deployment

0 helpful
3 replies

by jjames

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have been using the system in the lab and got to a point where we have tried to build the network deployment disk. We are using TCP/IP when we set it up. When we get to the point where it validates I get an error "The mapped network drive could not be created because of the following. Multiple connections to a server or shared resourse..." We have shut down all machines except the combined server/console with the same result. Any ideas?

3 replies

by toivo talikka

It would help enormously if you could tell what system(s) we are dealing with and how many machines.

by jjames

Right now I only have this setup in a lab. I am using an IBM M-Pro as the server/console running XP Service Pack2. Hooked to it I have an IBM T42 running XP as a console machine and an IBM T60 as a Target Machine. This is connected together using an ASANTE Friendly Net 5 Port ethernte hub. I have tried creating the boot disk with all machines running and then only the M Pro. Have also tried using the ethernet option and without the ethernet option. All with the same results. I have also tried with and without a secure repository. All with the same results. Thanks for your help.

This discussion is closed to new replies.