7 replies
by renslin
by jh022
by jh022
by segarraj
I havent found a site with this information.
I found the best way to learn it was by visiting datacenters and NOC's from vendors and ISP's that we deal with. Experience is the best teacher, and from talking to admins in various situations here's some tips I hope you find helpful:
1-Raised floor is a must! you should look to raise it by at least 6 and at most 12 inches. What determines how much you raise the floor is really whether you are going to need ramps or not. It is preferrable to actually lower the subfloor so that your raised floor will be at the same level as the rest of the building.
2-Consider a seperate room or a walk-in closet type of a situation for your patch pannels, hubs/switches and punchdown blocks. If you can't partition it, consider cabinet style racks with smoked plexi-glass doors.
3-Fire surpression should be CO2!!! many people forget this. and also remember, if there is another floor above the datacenter, it should either use CO2 or there should be a waterproof barrier above the datacenter ceiling.
4-The raised floor to ceiling height should be at least 10'
5-A solid core raised floor tile system stitting on top of individual posts which are mounted in a concrete subfloor is the best setup for minimizing vibration.
6-There should be at least 4' of plenum space. - also make sure you provide ample conduits to the plenums of the surrounding rooms and hallways. You will need this for cabling.
7-Consider a recessed raceway at 3' above floor level for neater cabling
8-Don't forget to supply enough power recepticles! There should be one approx every 4' on the walls and 1 recessed under the floor for every 16 sq ft of floor space
9-Make the room as big as you can. You will probably have to live with the room as it is for quite a while.
Hope that helped.
by segarraj
Oh, and as for temperature, heating and cooling should be seperate units from what is used for the rest of the building. The ventilation for the room should ideally be piped under the floor with vents cut into some of the tiles.
Make sure you include a de-humidifier.
The ideal temperature and humidity levels are subject to the equipment in the room. Your hardware vendor can tell you what is ideal.
We try to keep our datacenter @ 55 degrees 0% humidity.
by jh022
by jh022
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending