4 replies
by itm420 Accepted solution
by robo_dev Accepted solution
Even if it worked....
The cost and potential-for-failure of five repeaters would be extreme. This would cost probably five times the cost of running fiber, be 1/10th as reliable and 1/1000 or the throughput.
Consider that in order to provide X-number of fast Ethernet ports, your uplinks to those switches have to be faster, typically at least one or two gigabit Ethernet connections. Having two fiber optic gigabit Ethernet connections also provides redundancy.
Running 100/base-T through multiple repeaters will not work....running 1000 baseT through multiple repeaters REALLY will not work.
by itm420 Accepted solution
by robo_dev Accepted solution
In general, you just need to run fiber to give you Gigabit or 10 GB Ethernet uplinks to your edge switches.
The only question in my mind would be, if money were no object and you needed exceptional bandwidth, then you would run 10 GB Ethernet uplinks so you could have some Gig Ethernet ports in labs/classrooms.
In terms of investment, the only question at this point would be whether you select single-mode or multi-mode fiber. Am 99.9% sure that MMF would suffice.
http://en.wikipedia.org/wiki/Multi-mode_optical_fiber#Comparison_with_single-mode_fiber
Don't forget, too, that you can 'home run' a server in a classroom back to a switch over fiber.
You really just need to call a sales rep from a local network company to get a quote....they will give you a design for free.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending